In situ 3D polymerization ( IS -3DP): Implementing an aqueous two-phase system for the formation of 3D objects inside a microfluidic channel
Biomicrofluidics · 01.09.2024 · 18 (5)
DOI: 10.1063/5.0226620 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biomicrofluidics, online erschienen am 24.10.2024. Verfasst von Guillermo Ramirez-Alvarado und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering and Chemical Engineering, University of Texas at San Antonio, San Antonio, Texas 78249, USA. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: University of Texas System, UTSA VPR Office, UTSA Office of Commercialization and Innovation.
Abstract (Originalsprache)
Rapid prototyping and fabrication of microstructure have been revolutionized by 3D printing, especially stereolithography (SLA) based techniques due to the superior spatial resolution they offer. However, SLA-type 3D printing faces intrinsic challenges in multi-material integration and adaptive Z-layer slicing due to the use of a vat and a mechanically controlled Z-layer generation. In this paper, we present the conceptualization of a novel paradigm which uses dynamic and multi-phase laminar flow in a microfluidic channel to achieve fabrication of 3D objects. Our strategy, termed “in situ 3D polymerization,” combines in situ polymerization and co-flow aqueous two-phase systems and achieves slicing, polymerization, and layer-by-layer printing of 3D structures in a microchannel. The printing layer could be predicted and controlled solely by programming the fluid input. Our strategy provides generalizability to fit with different light sources, pattern generators, and photopolymers. The integration of the microfluidic channel could enable high-degree multi-material integration without complicated modification of the 3D printer.
Autor:innen und Institutionen
- Department of Biomedical Engineering and Chemical Engineering, University of Texas at San Antonio, San Antonio, Texas 78249, USA.
ORCID-Profile: Guillermo Ramirez-Alvarado, Gabriel Garibaldi, Chiraz Toujani, Gongchen Sun
Förderung
- University of Texas System
- UTSA VPR Office
- UTSA Office of Commercialization and Innovation
Zitieren
APA
Ramirez-Alvarado, G., Garibaldi, G., Toujani, C., & Sun, G. (2024). In situ 3D polymerization ( IS -3DP): Implementing an aqueous two-phase system for the formation of 3D objects inside a microfluidic channel. Biomicrofluidics, 18(5). https://doi.org/10.1063/5.0226620
Vancouver
Ramirez-Alvarado G, Garibaldi G, Toujani C, Sun G. In situ 3D polymerization ( IS -3DP): Implementing an aqueous two-phase system for the formation of 3D objects inside a microfluidic channel. Biomicrofluidics. 2024;18(5). doi:10.1063/5.0226620
BibTeX
@article{RamirezAlvarado2024,
author = {Ramirez-Alvarado, Guillermo and Garibaldi, Gabriel and Toujani, Chiraz and Sun, Gongchen},
title = {In situ 3D polymerization ( IS -3DP): Implementing an aqueous two-phase system for the formation of 3D objects inside a microfluidic channel},
journal = {Biomicrofluidics},
year = {2024},
volume = {18},
number = {5},
doi = {10.1063/5.0226620}
}
EUVIMED