Shock wave generated by composite energetic material driven by electrical non-penetrating wire explosion plasma
Review of Scientific Instruments · 01.09.2024 · 95 (9)
DOI: 10.1063/5.0226304 ↗Kurz gefasst
Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 03.09.2024. Verfasst von Yang Meng und 4 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Electrical Insulation and Power Equipment, Xi'an Jiaotong University, Xi'an, Shaanxi 710049, People's Republic of China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 22 Literaturangaben. Gefördert von: National Key Research and Development Program of China.
Abstract (Originalsprache)
Underwater shock wave technology can realize dynamic rock fracture, which is helpful to increase oil and gas reservoir permeability. It can realize the efficient exploitation of medium and low maturity oil and gas resources. In practical application, the shock wave parameters require not only high intensity but also safety and controllability. To meet these requirements, insensitive composite energetic materials driven by electrical wire explosion plasma were proposed, which is one of the most promising methods. However, when in use, the load assembly process containing wires and energetic materials is complex. In this paper, a new type of energetic material load is proposed, using non-penetrating wire to drive composite energetic material. It can simplify the production process of the energetic load and produce acceptable shock wave parameters. The test results show that both the energy deposition of the wire and the shock wave intensity decrease under a non-penetrating wire structure. However, the shock wave intensity is still higher than that of the underwater electrical wire explosion. Based on schlieren diagnosis, it is found that the composite energetic material is gradually driven, and the energy release is not concentrated. In addition, the “non-wire” structure driving condition was discussed in contrast. Under this condition, the process of ionization channel establishment in composite energetic materials is random. The shock wave intensity is weak because the composite energetic material is in the process of slow detonation.
Autor:innen und Institutionen
- State Key Laboratory of Electrical Insulation and Power Equipment, Xi'an Jiaotong University, Xi'an, Shaanxi 710049, People's Republic of China.
ORCID-Profile: Yang Meng, Weidong Ding
Förderung
- National Key Research and Development Program of China
Zitieren
APA
Meng, Y., Jin, W., Zhang, K., Ding, W., & Zhang, Y. (2024). Shock wave generated by composite energetic material driven by electrical non-penetrating wire explosion plasma. Review of Scientific Instruments, 95(9). https://doi.org/10.1063/5.0226304
Vancouver
Meng Y, Jin W, Zhang K, Ding W, Zhang Y. Shock wave generated by composite energetic material driven by electrical non-penetrating wire explosion plasma. Review of Scientific Instruments. 2024;95(9). doi:10.1063/5.0226304
BibTeX
@article{Meng2024,
author = {Meng, Yang and Jin, Wenyong and Zhang, Ke and Ding, Weidong and Zhang, Yongmin},
title = {Shock wave generated by composite energetic material driven by electrical non-penetrating wire explosion plasma},
journal = {Review of Scientific Instruments},
year = {2024},
volume = {95},
number = {9},
doi = {10.1063/5.0226304}
}
EUVIMED