EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Device-level XPS analysis for physical and electrical characterization of oxide-channel thin-film transistors

Yun-Ju Cho, Young-Ha Kwon, Nak-Jin Seong, Kyu-Jeong Choi, Myung Keun Lee, Gyungtae Kim, Sung-Min Yoon

Journal of Applied Physics · 21.08.2024 · 136 (7)

DOI: 10.1063/5.0225676 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Physics, online erschienen am 16.08.2024. Verfasst von Yun-Ju Cho und 6 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Ministry of Trade, Industry and Energy, Korea Semiconductor Research Consortium, Ministry of Science and ICT, South Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work aims to validate the feasibility of device-level analysis to reflect the effects of fabrication processes and operations, as contrasted with the conventional method of x-ray photoelectron spectroscopy (XPS), which is widely employed in amorphous oxide semiconductor thin-film transistors (TFTs) but analyzes film-level specimens. First, an analysis setup was introduced to determine the optimal x-ray target position for device-level XPS, where the intensity of channel components is maximized, through imaging XPS. Then, to demonstrate the effectiveness of this approach, the impact of channel composition and bias-stress was investigated through the implementation of device-level XPS on bottom-gate InGaZnO TFTs. The cationic composition ratios of the fabricated TFTs varied from 0.27:1:1.33 (In:Ga:Zn) and 0.28:1:2.21 when the subcycle of the Zn precursor increased by a factor of 1.5 in the atomic-layer deposition process. The device with a higher Zn ratio exhibited a more negative turn-on voltage and a twice larger subthreshold swing. These characteristics were validated from the comparisons in the relative amount of oxygen vacancies in O 1s of the channel and interface regions by 8.4%p and 5.6%p, respectively, between the devices. Furthermore, the electron trapping effect was verified for the devices subjected to a positive gate bias-stress of 3 MV/cm, as evidenced by the changes in the binding energy difference (0.35 eV) between the channel and gate insulator layers, in comparison to the non-stressed device. Consequently, this work demonstrates that device-level XPS can be an effective tool for understanding TFTs' characteristics in various ways beyond film-level analysis.

Förderung

  • Ministry of Trade, Industry and Energy
  • Korea Semiconductor Research Consortium
  • Ministry of Science and ICT, South Korea

Zitieren

APA

Cho, Y., Kwon, Y., Seong, N., Choi, K., Lee, M. K., Kim, G., & Yoon, S. (2024). Device-level XPS analysis for physical and electrical characterization of oxide-channel thin-film transistors. Journal of Applied Physics, 136(7). https://doi.org/10.1063/5.0225676

Vancouver

Cho Y, Kwon Y, Seong N, Choi K, Lee MK, Kim G, et al. Device-level XPS analysis for physical and electrical characterization of oxide-channel thin-film transistors. Journal of Applied Physics. 2024;136(7). doi:10.1063/5.0225676

BibTeX
@article{Cho2024,
  author = {Cho, Yun-Ju and Kwon, Young-Ha and Seong, Nak-Jin and Choi, Kyu-Jeong and Lee, Myung Keun and Kim, Gyungtae and Yoon, Sung-Min},
  title = {Device-level XPS analysis for physical and electrical characterization of oxide-channel thin-film transistors},
  journal = {Journal of Applied Physics},
  year = {2024},
  volume = {136},
  number = {7},
  doi = {10.1063/5.0225676}
}
Kostenlos starten →