EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-stage precipitation modeling for AA 7050 hole repairs in additive friction stir deposition

Bill Feng, Manoj R. Rajanna, Jim Lua, Greg Hahn, Kendall Knight, Gabriel Murray, Alan Timmons, Nam Phan

Journal of Applied Physics · 28.10.2024 · 136 (16)

DOI: 10.1063/5.0221890 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Physics, online erschienen am 23.10.2024. Verfasst von Bill Feng und 7 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Naval Air Systems Command.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A multi-stage precipitation model is formulated to predict the microstructural evolution and explain the high performance of additive friction stir deposited aluminum alloy 7050 (AA 7050) for hole repair. The first stage is the heating process due to the high-temperature thermomechanical process of the stir. In this process, small η precipitates dissolve as they lose their stability with increasing temperature, and this causes the volume fraction of η precipitates to decrease and the concentration of Mg and Zn in the matrix to increase. The second stage is the cooling process at the end of the repair where material feeding ends and the tool is lifted away. Heterogeneous nucleation of η precipitates may occur and as the temperature cools below 250 °C, Guinier–Preston (GP) zones start to form. The final stage is the natural aging process, where the η′ precipitate starts to grow. The volume fraction and precipitate radius are predicted for each type of precipitate. Furthermore, the fine η′ precipitates and GP zones with a decent volume fraction improve the material strength and fatigue life.

Förderung

  • Naval Air Systems Command

Zitieren

APA

Feng, B., Rajanna, M. R., Lua, J., Hahn, G., Knight, K., Murray, G., Timmons, A., & Phan, N. (2024). Multi-stage precipitation modeling for AA 7050 hole repairs in additive friction stir deposition. Journal of Applied Physics, 136(16). https://doi.org/10.1063/5.0221890

Vancouver

Feng B, Rajanna MR, Lua J, Hahn G, Knight K, Murray G, et al. Multi-stage precipitation modeling for AA 7050 hole repairs in additive friction stir deposition. Journal of Applied Physics. 2024;136(16). doi:10.1063/5.0221890

BibTeX
@article{Feng2024,
  author = {Feng, Bill and Rajanna, Manoj R. and Lua, Jim and Hahn, Greg and Knight, Kendall and Murray, Gabriel and Timmons, Alan and Phan, Nam},
  title = {Multi-stage precipitation modeling for AA 7050 hole repairs in additive friction stir deposition},
  journal = {Journal of Applied Physics},
  year = {2024},
  volume = {136},
  number = {16},
  doi = {10.1063/5.0221890}
}
Kostenlos starten →