EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Neutronics simulations for the design of neutron flux monitors in SPARC

X Wang iD, R Gocht, J Ball iD, S Mackie iD, E Panontin iD, R A Tinguely iD, P Raj iD, I Holmes iD, A A Saltos, A Johnson iD, A Grieve iD

Review of Scientific Instruments · 01.08.2024 · 95 (8)

DOI: 10.1063/5.0219508 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 30.08.2024. Verfasst von X Wang und 10 weiteren Autor:innen. Beteiligte Einrichtung: Plasma Science and Fusion Center, MIT, Cambridge, Massachusetts 02139, USA. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 13 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Commonwealth Fusion Systems.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents the development and application of high-fidelity neutronic models of the SPARC tokamak for the design of neutron flux monitors (NFM) for application during plasma operations. NFMs measure the neutron flux in the tokamak hall, which is related to fusion power via calibration. We have explored Boron-10 gamma-compensated ionization chambers (ICs) and parallel-plate Uranium-238 fission chambers (FCs). We plan for all NFMs to be located by the wall in the tokamak hall and directly exposed to neutrons streaming through a shielded opening in a midplane port. Our simulations primarily use a constructive solid geometry-based OpenMC model based on the true SPARC geometry. The OpenMC model is benchmarked against a detailed CAD-based MCNP6 model. The B10 ICs are equipped with high-density polyethylene (HDPE) sleeves, borated HDPE housings, and borated aluminum covers to shield out scattered neutrons, optimize detector response levels, and make calibration robust against changes in the tokamak hall. The B10 neutron absorption branching ratio may cause the detectors’ responses to be non-linear to neutron flux >200 keV. However, our simulations unveil that, in the SPARC environment and with the proposed housings and sleeves, >99% of the detector responses are induced by <100 keV neutrons. U238’s insensitivity to slow neutrons makes this FC a promising candidate for direct fusion neutron measurements. Along with a borated HDPE sleeve, about 60% of the FCs’ responses are induced by direct neutrons.

Autor:innen und Institutionen

  • Plasma Science and Fusion Center, MIT, Cambridge, Massachusetts 02139, USA.
  • Commonwealth Fusion System, Devens, Massachusetts 01434, USA.

ORCID-Profile: X Wang, J Ball, S Mackie, E Panontin, R A Tinguely, P Raj, I Holmes, A Johnson, A Grieve

Förderung

  • Commonwealth Fusion Systems

Zitieren

APA

Wang, X., Gocht, R., Ball, J., Mackie, S., Panontin, E., Tinguely, R. A., Raj, P., Holmes, I., Saltos, A. A., Johnson, A., & Grieve, A. (2024). Neutronics simulations for the design of neutron flux monitors in SPARC. Review of Scientific Instruments, 95(8). https://doi.org/10.1063/5.0219508

Vancouver

Wang X, Gocht R, Ball J, Mackie S, Panontin E, Tinguely RA, et al. Neutronics simulations for the design of neutron flux monitors in SPARC. Review of Scientific Instruments. 2024;95(8). doi:10.1063/5.0219508

BibTeX
@article{Wang2024,
  author = {Wang, X and Gocht, R and Ball, J and Mackie, S and Panontin, E and Tinguely, R A and Raj, P and Holmes, I and Saltos, A A and Johnson, A and Grieve, A},
  title = {Neutronics simulations for the design of neutron flux monitors in SPARC},
  journal = {Review of Scientific Instruments},
  year = {2024},
  volume = {95},
  number = {8},
  doi = {10.1063/5.0219508}
}
Kostenlos starten →