Anisotropy of microstructure features and tensile properties of Ti–48Al–2Cr–2Nb alloy produced by electron beam powder bed fusion
AIP Advances · 01.08.2024 · 14 (8)
DOI: 10.1063/5.0213062 ↗Kurz gefasst
Fachartikel in der Zeitschrift AIP Advances, online erschienen am 12.08.2024. Verfasst von Guoquan Ding und 6 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Science and Technology Program of Shaanxi Province, Special Project for Research and Development in Key areas of Guangdong Province, National Science and Technology Major Project.
Abstract (Originalsprache)
A Ti–48Al–2Cr–2Nb alloy was produced by electron beam powder bed fusion. The effect of the volume energy density parameter on the forming quality was investigated, and the tissue characteristics, hardness distribution, and mechanical properties of the alloy were analyzed. The results showed that the quality was better when the volume energy density parameter was 21.5–22.5 J/mm3. The microstructure of the alloy has the phenomenon of changing with the forming height: with an increase in the forming height, the forming part produces the phenomenon of strip microstructure along the construction direction, and the regional microstructure variability occurs under the cross section of the same height. The average hardness of the alloy reached 375.2 HV at the bottom, 381.8 HV in the middle, and 389.6 HV at the top, and the standard errors of the hardness values were 12.40, 10.49, and 7.12 HV, respectively, with the microhardness showing a gradual increase along the molding direction, and the homogeneity was gradually better. The transverse tensile strength at room temperature reached 526 MPa, the yield strength reached 461 MPa, and the elongation at break reached 1.24%, while the longitudinal tensile strength reached 486 MPa, the yield strength reached 414 MPa, and the elongation at break reached 1.02%.
Förderung
- Key Science and Technology Program of Shaanxi Province
- Special Project for Research and Development in Key areas of Guangdong Province
- National Science and Technology Major Project
Zitieren
APA
Ding, G., Zhou, X., Chang, D., Gao, H., Dang, M., Tian, Y., & Zhang, T. (2024). Anisotropy of microstructure features and tensile properties of Ti–48Al–2Cr–2Nb alloy produced by electron beam powder bed fusion. AIP Advances, 14(8). https://doi.org/10.1063/5.0213062
Vancouver
Ding G, Zhou X, Chang D, Gao H, Dang M, Tian Y, et al. Anisotropy of microstructure features and tensile properties of Ti–48Al–2Cr–2Nb alloy produced by electron beam powder bed fusion. AIP Advances. 2024;14(8). doi:10.1063/5.0213062
BibTeX
@article{Ding2024,
author = {Ding, Guoquan and Zhou, Xin and Chang, Dongbo and Gao, Hanyu and Dang, Mengxiang and Tian, Ying and Zhang, Ting},
title = {Anisotropy of microstructure features and tensile properties of Ti–48Al–2Cr–2Nb alloy produced by electron beam powder bed fusion},
journal = {AIP Advances},
year = {2024},
volume = {14},
number = {8},
doi = {10.1063/5.0213062}
}
EUVIMED