EUVIMEDEUVIMED entdecken
Crossref

Heated-H3PO4 etching of (001) β-Ga2O3

Steve Rebollo, Takeki Itoh, Sriram Krishnamoorthy, James S. Speck

Applied Physics Letters · 01.07.2024 · 125 (1)

DOI: 10.1063/5.0209222 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Physics Letters, online erschienen am 01.07.2024. Verfasst von Steve Rebollo und 3 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: Lawrence Livermore National Laboratory, Air Force Office of Scientific Research.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

β-Ga2O3 is a promising ultra-wide bandgap semiconductor with melt-grown substrates that are scalable, particularly in the (001) orientation. In this study, we report on the heated-phosphoric acid etching of (001) β-Ga2O3. A wagon wheel pattern with spokes aligned to a range of specific crystallographic directions was fabricated on (001) β-Ga2O3. At 160 °C, the (001) etch rate was 1.47 μm/h, which is comparable to etch rates obtained via dry etch techniques. The etched (001) surface had a morphology that was smoother than an inductively coupled plasma etched surface. All spokes possessed relatively smooth sidewalls. Spokes oriented along the [100] direction exhibited minimal SiO2 mask undercut rates at lower etch temperatures and symmetric trapezoidal profiles with near vertical (010)-like sidewalls, which are ideal for device structures with a trench geometry. Spokes oriented along the [010] direction exhibited significant SiO2 mask undercut rates and asymmetric trapezoidal profiles with different sidewall angles. These spokes also possessed reduced sidewall angles, which is favorable for field management at device corners and edges. The etch process was used to realize a dense array of [100]-oriented trenches with a height of 1.5 μm, a base width of 2.0 μm, and a mask width of 0.8 μm. The work highlights the potential for ion damage-free, standalone heated-H3PO4 etching as a viable alternative to the dry etching of (001) β-Ga2O3 for high-performance device applications.

Förderung

  • Lawrence Livermore National Laboratory
  • Air Force Office of Scientific Research

Zitieren

APA

Rebollo, S., Itoh, T., Krishnamoorthy, S., & Speck, J. S. (2024). Heated-H3PO4 etching of (001) β-Ga2O3. Applied Physics Letters, 125(1). https://doi.org/10.1063/5.0209222

Vancouver

Rebollo S, Itoh T, Krishnamoorthy S, Speck JS. Heated-H3PO4 etching of (001) β-Ga2O3. Applied Physics Letters. 2024;125(1). doi:10.1063/5.0209222

BibTeX
@article{Rebollo2024,
  author = {Rebollo, Steve and Itoh, Takeki and Krishnamoorthy, Sriram and Speck, James S.},
  title = {Heated-H3PO4 etching of (001) β-Ga2O3},
  journal = {Applied Physics Letters},
  year = {2024},
  volume = {125},
  number = {1},
  doi = {10.1063/5.0209222}
}
Kostenlos starten →