An updated technique to obtain explosive kinetics data on microsecond timescales
Review of Scientific Instruments · 01.07.2024 · 95 (7)
DOI: 10.1063/5.0204401 ↗Kurz gefasst
Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 22.07.2024. Verfasst von Douglas G Tasker und 10 weiteren Autor:innen. Beteiligte Einrichtung: Detonation Science and Technology: Q-6, Los Alamos National Laboratory, Los Alamos, New Mexico 87545, USA. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Laboratory Directed Research and Development.
Abstract (Originalsprache)
There are few techniques available for chemists to obtain time-to-explosion data with known temperature inputs at the early stages of the design and synthesis of new explosives. In the 1960s, a technique was developed to rapidly heat milligram-quantities of confined explosives to ∼1000 K on microsecond timescales. Wenograd [Trans. Faraday Soc. 57, 1612 (1961)] loaded explosives inside stainless steel hypodermic needles, connected them to a fireset and rapidly discharged a capacitor through the steel. He obtained the temperature by measuring the needle resistance in a Wheatstone bridge arrangement and the time to explosion from a needle rupture. However, owing to the narrow-gauge needles used in the original research, the experiment was only possible with melt-castable explosives; it was never replicated, and modern diagnostics are now available with advances beyond the 1960s. Here, we report the development of the High Explosives Initiation Time (HEIT) test, which utilizes a 250 J pulsed power system to heat the needles. This work extends the Wenograd approach by using optical diagnostics, computational modeling, and advanced techniques to measure needle resistance and needle rupture. Preliminary rate information for pentaerythritol tetranitrate (PETN) will be presented.
Autor:innen und Institutionen
- Detonation Science and Technology: Q-6, Los Alamos National Laboratory, Los Alamos, New Mexico 87545, USA.
- High Explosives Science and Technology: Q-5, Los Alamos National Laboratory, Los Alamos, New Mexico 87545, USA.
- Theoretical Division, Los Alamos National Laboratory, Los Alamos, New Mexico 87545, USA.
ORCID-Profile: Douglas G Tasker, Daniel A Skrabacz, Maria C Campbell, Kyle D Spielvogel, Aidan B McLaughlin, Robert Houlton, Robert Tucker, Jeremiah D Moore, M J Cawkwell, Virginia W Manner
Förderung
- Laboratory Directed Research and Development
Zitieren
APA
Tasker, D. G., Skrabacz, D. A., Campbell, M. C., Spielvogel, K. D., Morinec, A. G., McLaughlin, A. B., Houlton, R., Tucker, R., Moore, J. D., Cawkwell, M. J., & Manner, V. W. (2024). An updated technique to obtain explosive kinetics data on microsecond timescales. Review of Scientific Instruments, 95(7). https://doi.org/10.1063/5.0204401
Vancouver
Tasker DG, Skrabacz DA, Campbell MC, Spielvogel KD, Morinec AG, McLaughlin AB, et al. An updated technique to obtain explosive kinetics data on microsecond timescales. Review of Scientific Instruments. 2024;95(7). doi:10.1063/5.0204401
BibTeX
@article{Tasker2024,
author = {Tasker, Douglas G and Skrabacz, Daniel A and Campbell, Maria C and Spielvogel, Kyle D and Morinec, Allen G and McLaughlin, Aidan B and Houlton, Robert and Tucker, Robert and Moore, Jeremiah D and Cawkwell, M J and Manner, Virginia W},
title = {An updated technique to obtain explosive kinetics data on microsecond timescales},
journal = {Review of Scientific Instruments},
year = {2024},
volume = {95},
number = {7},
doi = {10.1063/5.0204401}
}
EUVIMED