Mid-infrared optical coherence tomography with MHz axial line rate for real-time non-destructive testing
APL Photonics · 01.05.2024 · 9 (5)
DOI: 10.1063/5.0202019 ↗Kurz gefasst
Fachartikel in der Zeitschrift APL Photonics, online erschienen am 17.05.2024. Verfasst von Satoko Yagi und 4 weiteren Autor:innen. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Japan Society for the Promotion of Science, Research Foundation for Opto-Science and Technology, Nakatani Foundation for Advancement of Measuring Technologies in Biomedical Engineering.
Abstract (Originalsprache)
Non-destructive testing (NDT) is crucial for ensuring product quality and safety across various industries. Conventional methods, such as ultrasonic, terahertz, and x-ray imaging, have limitations in terms of probe-contact requirement, depth resolution, or radiation risks. Optical coherence tomography (OCT) is a promising alternative to solve these limitations, but it suffers from strong scattering, limiting its penetration depth. Recently, OCT in the mid-infrared (MIR) spectral region has attracted attention with a significantly lower scattering rate than in the near-infrared region. However, the highest reported A-scan rate of MIR-OCT has been 3 kHz, which requires long data acquisition time to take an image, unsatisfying industrial demands for real-time diagnosis. Here, we present a high-speed MIR-OCT system operating in the 3–4 µm region that employs the frequency-swept spectrum detection in OCT technique based on time-stretch infrared spectroscopy. By integrating a broadband femtosecond MIR pulsed laser operating at a repetition rate of 50 MHz, we achieved an A-scan rate of 1 MHz with an axial resolution of 11.6 µm, a 10 dB roll-off depth of about 700 µm, and a sensitivity of 55 dB. As a proof-of-concept demonstration, we imaged the surface of substrates covered by highly scattering paint coatings. The demonstrated A-scan rate surpasses previous state of the art by more than two orders of magnitude, paving the way for real-time NDT of industrial products, cultural assets, and structures.
Förderung
- Japan Society for the Promotion of Science
- Research Foundation for Opto-Science and Technology
- Nakatani Foundation for Advancement of Measuring Technologies in Biomedical Engineering
- UTEC-UTokyo FSI Research Grant Program
Zitieren
APA
Yagi, S., Nakamura, T., Hashimoto, K., Kawano, S., & Ideguchi, T. (2024). Mid-infrared optical coherence tomography with MHz axial line rate for real-time non-destructive testing. APL Photonics, 9(5). https://doi.org/10.1063/5.0202019
Vancouver
Yagi S, Nakamura T, Hashimoto K, Kawano S, Ideguchi T. Mid-infrared optical coherence tomography with MHz axial line rate for real-time non-destructive testing. APL Photonics. 2024;9(5). doi:10.1063/5.0202019
BibTeX
@article{Yagi2024,
author = {Yagi, Satoko and Nakamura, Takuma and Hashimoto, Kazuki and Kawano, Shotaro and Ideguchi, Takuro},
title = {Mid-infrared optical coherence tomography with MHz axial line rate for real-time non-destructive testing},
journal = {APL Photonics},
year = {2024},
volume = {9},
number = {5},
doi = {10.1063/5.0202019}
}
EUVIMED