EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Compact high-Q Ka-band sapphire distributed Bragg resonator

Vladimir Iltchenko, Rabi Wang, Michael Toennies, Andrey Matsko

Journal of Applied Physics · 14.04.2024 · 135 (14)

DOI: 10.1063/5.0195051 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Physics, online erschienen am 10.04.2024. Verfasst von Vladimir Iltchenko und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 13 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Jet Propulsion Laboratory.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In a class of high quality (Q-) factor dielectric resonators with low radiative losses, including popular whispering-gallery mode (WGM) resonators with high azimuthal mode numbers, due to high confinement of modal field in dielectric, the Q-factor is limited by the value of inverse dielectric loss tangent of dielectric material. Metal enclosures necessary for device integration only marginally affect the Q-factor while eliminating the residual radiative loss and allowing the optimization of input and output coupling. While very high Q-factors ∼200000 are available in sapphire WGM resonators in X-band, at millimeter wave frequencies increasing dielectric loss limits the Q-factor to much smaller values, e.g. ∼50000 and ∼25000 for quasi-TE and quasi-TM modes, correspondingly, at 36 GHz. The use of distributed Bragg reflection (DBR) principle allows to push modal energy outside dielectric while also isolating it from Joule losses in metallic enclosure walls. Very high Q∼600000>tgδ has been demonstrated in X-band [C. A. Flory and R. C. Taber, IEEE Trans. Ultrason., Ferroelectr., Freq. Control 44, 486–495 (1997).] at the expense of impractically large dimensions. In this work, we report on the assembly and testing of a compact Ka-band sapphire distributed Bragg reflector cavity characterized with Q-factor seven times larger than one predicted by the material’s dielectric loss at the frequency of interest. An intrinsic Q-factor of ∼200000 is demonstrated at 36 GHz for the lowest order TM-mode of a sapphire DBR. The resonator has 50 cm3 volume, smaller than previously demonstrated DBRs.

Förderung

  • Jet Propulsion Laboratory

Zitieren

APA

Iltchenko, V., Wang, R., Toennies, M., & Matsko, A. (2024). Compact high-Q Ka-band sapphire distributed Bragg resonator. Journal of Applied Physics, 135(14). https://doi.org/10.1063/5.0195051

Vancouver

Iltchenko V, Wang R, Toennies M, Matsko A. Compact high-Q Ka-band sapphire distributed Bragg resonator. Journal of Applied Physics. 2024;135(14). doi:10.1063/5.0195051

BibTeX
@article{Iltchenko2024,
  author = {Iltchenko, Vladimir and Wang, Rabi and Toennies, Michael and Matsko, Andrey},
  title = {Compact high-Q Ka-band sapphire distributed Bragg resonator},
  journal = {Journal of Applied Physics},
  year = {2024},
  volume = {135},
  number = {14},
  doi = {10.1063/5.0195051}
}
Kostenlos starten →