Surface p-type band bending and energy level alignment minimizes voltage loss in perovskite solar cells
Applied Physics Letters · 08.01.2024 · 124 (2)
DOI: 10.1063/5.0189101 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Physics Letters, online erschienen am 10.01.2024. Verfasst von Hongyang Fu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 33 Literaturangaben. Gefördert von: National Natural Science Foundation of China-China Academy of General Technology Joint Fund for Basic Research, Natural Science Foundation of Hebei Province, Department of Education of Hebei Province.
Abstract (Originalsprache)
Due to the significant energy level mismatch and contact energy loss between the perovskite absorber layer and p-type hole-transporting layer (HTL), there exists a large hole transport barrier between the perovskite absorber layer and HTL, which hinders hole transport and leads to lower open circuit voltage (VOC) in perovskite devices. Therefore, the surface contact process between the perovskite film and the hole-transporting layer becomes particularly important. Here, we doped cesium silver bismuth bromide (Cs2AgBiBr6) quantum dots (QDs) into ethyl acetate (EA) as an anti-solvent to achieve the formation of a bulk heterojunction structure with quantum dot solution on the surface of the MAPbI3 perovskite film. The perovskite film exhibits appropriate band edge bending and forms a p-type semiconductor. This facilitates the directed transport of photo-induced charge carriers to the hole-transporting layer, reducing carrier recombination losses and enhancing the collection efficiency of holes by the HTL. Through characterization experiments, we have found that this method significantly improves the VOC and photovoltaic conversion efficiency (PCE) of perovskite solar cells. The perovskite solar cells fabricated using this method show a better PCE with a VOC of 1.06 V.
Förderung
- National Natural Science Foundation of China-China Academy of General Technology Joint Fund for Basic Research
- Natural Science Foundation of Hebei Province
- Department of Education of Hebei Province
Zitieren
APA
Fu, H., Shi, D., Ren, Y., Xu, G., & An, X. (2024). Surface p-type band bending and energy level alignment minimizes voltage loss in perovskite solar cells. Applied Physics Letters, 124(2). https://doi.org/10.1063/5.0189101
Vancouver
Fu H, Shi D, Ren Y, Xu G, An X. Surface p-type band bending and energy level alignment minimizes voltage loss in perovskite solar cells. Applied Physics Letters. 2024;124(2). doi:10.1063/5.0189101
BibTeX
@article{Fu2024,
author = {Fu, Hongyang and Shi, Donghong and Ren, Yingke and Xu, Guoliang and An, Xingtao},
title = {Surface p-type band bending and energy level alignment minimizes voltage loss in perovskite solar cells},
journal = {Applied Physics Letters},
year = {2024},
volume = {124},
number = {2},
doi = {10.1063/5.0189101}
}
EUVIMED