EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Current status and challenges for hole-selective poly-silicon based passivating contacts

Rabin Basnet, Di Yan, Di Kang, Mohamed M. Shehata, Pheng Phang, Thien Truong, James Bullock, Heping Shen, Daniel Macdonald

Applied Physics Reviews · 01.03.2024 · 11 (1)

DOI: 10.1063/5.0185379 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Physics Reviews, online erschienen am 09.02.2024. Verfasst von Rabin Basnet und 8 weiteren Autor:innen. Die Arbeit wurde bisher 53-mal zitiert (Crossref) und nennt 204 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Renewable Energy Agency.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Doped polysilicon (poly-Si) passivating contacts have emerged as a key technology for the next generation of silicon solar cells in mass production, owing to their excellent performance and high compatibility with the existing passivated emitter and rear cell technology. However, the current solar cell architecture based on a rear-side electron-selective (n+) poly-Si contact is also approaching its practical limit (∼26%) in mass production. The full potential of doped poly-Si passivating contacts can only be realized through incorporation of both electron-selective and hole-selective (p+) poly-Si contacts. While studies of both p+ and n+ poly-Si contacts commenced simultaneously, significant performance differences have arisen. Phosphorus-doped poly-Si contacts consistently outperform boron-doped counterparts, displaying typically lower recombination current density (J0) values (1–5fA/cm2 vs 7–15fA/cm2). This discrepancy can be attributed to inadequate optimization of p+ poly-Si contacts and fundamental limitations related to boron doping. The poorer passivation of p+ poly-Si contacts can be at least partly attributed to boron segregation into the interfacial oxide layers, compromising the interfacial oxide integrity and reducing the chemical passivation effectiveness. This review critically examines the progress of p+ poly-Si contacts characterized by cell efficiency and J0 values, delves into existing challenges, identifies potential solutions, and explores some potential solar cell architectures to enhance efficiency by incorporating p+ poly-Si contacts.

Förderung

  • Australian Renewable Energy Agency

Zitieren

APA

Basnet, R., Yan, D., Kang, D., Shehata, M. M., Phang, P., Truong, T., Bullock, J., Shen, H., & Macdonald, D. (2024). Current status and challenges for hole-selective poly-silicon based passivating contacts. Applied Physics Reviews, 11(1). https://doi.org/10.1063/5.0185379

Vancouver

Basnet R, Yan D, Kang D, Shehata MM, Phang P, Truong T, et al. Current status and challenges for hole-selective poly-silicon based passivating contacts. Applied Physics Reviews. 2024;11(1). doi:10.1063/5.0185379

BibTeX
@article{Basnet2024,
  author = {Basnet, Rabin and Yan, Di and Kang, Di and Shehata, Mohamed M. and Phang, Pheng and Truong, Thien and Bullock, James and Shen, Heping and Macdonald, Daniel},
  title = {Current status and challenges for hole-selective poly-silicon based passivating contacts},
  journal = {Applied Physics Reviews},
  year = {2024},
  volume = {11},
  number = {1},
  doi = {10.1063/5.0185379}
}
Kostenlos starten →