EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Indoor water splitting for hydrogen production through electrocatalysis using composite metal oxide catalysts

Fasiha Kashif, Muhammad Yasin Naz, Zunaira Kashif, Shazia Shukrullah, Muhammad Irfan, Salim Nasar Faraj Mursal, Saifur Rahman, Muawia Abdelkafi Magzoub Mohamed Ali

AIP Advances · 01.11.2023 · 13 (11)

DOI: 10.1063/5.0179459 ↗

Kurz gefasst

Fachartikel in der Zeitschrift AIP Advances, online erschienen am 21.11.2023. Verfasst von Fasiha Kashif und 7 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Najran University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study explores an optimistic approach for large-scale hydrogen production by employing electrocatalysts based on nickel, cobalt, iron, and aluminum oxides as alternatives to costlier metals. This approach offers a cost-effective solution to electrolysis in water media for hydrogen production. This investigation is focused on the electrolysis process, engaging NiO–Al2O3–CoO–Fe2O3 in 1M solution of NaOH and KOH. The environmental and economic analyses are conducted to evaluate the overall effect and cost-effectiveness of the electrolysis process. These findings provide valuable insights into the performance, feasibility, and challenges of using oxides of aluminum, nickel, iron, and cobalt in electrolysis for hydrogen production. The structural and morphological analyses of metal oxides are conducted using XRD and SEM tools, which showed reduced crystallinity and open pore structure of the samples. Cyclic Voltammetry (CV), Electrochemical Impedance Spectroscopy (EIS), and Linear Sweep Voltammetry (LSV) revealed a higher electrocatalytic activity, a larger electrochemical active surface area, a higher current density, and a high density of active sites of NiO–Al2O3–CoO–Fe2O3 composite. Electrode 1 of the composite catalyst produced 500 ml of hydrogen after 30 min of the process, while electrodes 2 and 3 produced 263 and 249 ml of hydrogen, respectively. This study also elucidated the electrocatalytic mechanism involved in water splitting using these composite materials.

Förderung

  • Najran University

Zitieren

APA

Kashif, F., Naz, M. Y., Kashif, Z., Shukrullah, S., Irfan, M., Mursal, S. N. F., Rahman, S., & Ali, M. A. M. M. (2023). Indoor water splitting for hydrogen production through electrocatalysis using composite metal oxide catalysts. AIP Advances, 13(11). https://doi.org/10.1063/5.0179459

Vancouver

Kashif F, Naz MY, Kashif Z, Shukrullah S, Irfan M, Mursal SNF, et al. Indoor water splitting for hydrogen production through electrocatalysis using composite metal oxide catalysts. AIP Advances. 2023;13(11). doi:10.1063/5.0179459

BibTeX
@article{Kashif2023,
  author = {Kashif, Fasiha and Naz, Muhammad Yasin and Kashif, Zunaira and Shukrullah, Shazia and Irfan, Muhammad and Mursal, Salim Nasar Faraj and Rahman, Saifur and Ali, Muawia Abdelkafi Magzoub Mohamed},
  title = {Indoor water splitting for hydrogen production through electrocatalysis using composite metal oxide catalysts},
  journal = {AIP Advances},
  year = {2023},
  volume = {13},
  number = {11},
  doi = {10.1063/5.0179459}
}
Kostenlos starten →