Addition of Laponite to gelatin methacryloyl bioinks improves the rheological properties and printability to create mechanically tailorable cell culture matrices
APL Bioengineering · 01.03.2024 · 8 (1)
DOI: 10.1063/5.0166206 ↗Kurz gefasst
Fachartikel in der Zeitschrift APL Bioengineering, online erschienen am 08.01.2024. Verfasst von Jordan W Davern und 4 weiteren Autor:innen. Die Arbeit wurde bisher 43-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: ARC Training Centre for Cell and Tissue Engineering Technologies, QUT Centre for Biomedical Technologies.
Abstract (Originalsprache)
Extrusion-based bioprinting has gained widespread popularity in biofabrication due to its ability to assemble cells and biomaterials in precise patterns and form tissue-like constructs. To achieve this, bioinks must have rheological properties suitable for printing while maintaining cytocompatibility. However, many commonly used biomaterials do not meet the rheological requirements and therefore require modification for bioprinting applications. This study demonstrates the incorporation of Laponite-RD (LPN) into gelatin methacryloyl (GelMA) to produce highly customizable bioinks with desired rheological and mechanical properties for extrusion-based bioprinting. Bioink formulations were based on GelMA (5%–15% w/v) and LPN (0%–4% w/v), and a comprehensive rheological design was applied to evaluate key rheological properties necessary for extrusion-based bioprinting. The results showed that GelMA bioinks with LPN (1%–4% w/v) exhibited pronounced shear thinning and viscoelastic behavior, as well as improved thermal stability. Furthermore, a concentration window of 1%–2% (w/v) LPN to 5%–15% GelMA demonstrated enhanced rheological properties and printability required for extrusion-based bioprinting. Construct mechanical properties were highly tunable by varying polymer concentration and photocrosslinking parameters, with Young's moduli ranging from ∼0.2 to 75 kPa. Interestingly, at higher Laponite concentrations, GelMA cross-linking was inhibited, resulting in softer hydrogels. High viability of MCF-7 breast cancer cells was maintained in both free-swelling droplets and printed hydrogels, and metabolically active spheroids formed over 7 days of culture in all conditions. In summary, the addition of 1%–2% (w/v) LPN to gelatin-based bioinks significantly enhanced rheological properties and retained cell viability and proliferation, suggesting its suitability for extrusion-based bioprinting.
Autor:innen und Institutionen
ORCID-Profile: Jordan W Davern, Luke Hipwood, Laura J Bray, Christoph Meinert, Travis J Klein
Förderung
- ARC Training Centre for Cell and Tissue Engineering Technologies
- QUT Centre for Biomedical Technologies
Zitieren
APA
Davern, J. W., Hipwood, L., Bray, L. J., Meinert, C., & Klein, T. J. (2024). Addition of Laponite to gelatin methacryloyl bioinks improves the rheological properties and printability to create mechanically tailorable cell culture matrices. APL Bioengineering, 8(1). https://doi.org/10.1063/5.0166206
Vancouver
Davern JW, Hipwood L, Bray LJ, Meinert C, Klein TJ. Addition of Laponite to gelatin methacryloyl bioinks improves the rheological properties and printability to create mechanically tailorable cell culture matrices. APL Bioengineering. 2024;8(1). doi:10.1063/5.0166206
BibTeX
@article{Davern2024,
author = {Davern, Jordan W and Hipwood, Luke and Bray, Laura J and Meinert, Christoph and Klein, Travis J},
title = {Addition of Laponite to gelatin methacryloyl bioinks improves the rheological properties and printability to create mechanically tailorable cell culture matrices},
journal = {APL Bioengineering},
year = {2024},
volume = {8},
number = {1},
doi = {10.1063/5.0166206}
}
EUVIMED