Optimizing pump–probe reflectivity measurements of ultrafast photoacoustics with modulated asynchronous optical sampling
Review of Scientific Instruments · 01.10.2023 · 94 (10)
DOI: 10.1063/5.0155006 ↗Kurz gefasst
Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 03.10.2023. Verfasst von M C Velsink und 3 weiteren Autor:innen. Beteiligte Einrichtung: Advanced Research Center for Nanolithography (ARCNL), Science Park 106, 1098 XG Amsterdam, The Netherlands. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Research Council, Nederlandse Organisatie voor Wetenschappelijk Onderzoek, Horizon 2020 Framework Program.
Abstract (Originalsprache)
Time-resolved optical pump–probe experiments enable the study of complex light–matter interactions on ultrafast timescales, provided that they reach sufficient sensitivity. For instance, with pump-induced ultrafast photoacoustics, probing the typically small changes in optical properties requires a high signal-to-noise ratio. Asynchronous optical sampling (ASOPS), using two separate pulsed lasers at slightly different repetition rates, can be effective at removing noise by averaging many rapidly acquired traces. However, the pump–probe delay scan with ASOPS is always as long as the pump pulse interval, which is inefficient if the delay-time range of interest is shorter. Here, we demonstrate two modified ASOPS schemes that optimize measurement efficiency by only scanning the range of interest. The modification based on frequency modulated ASOPS (MASOPS) is most efficient, especially in the presence of low-frequency flicker noise. We provide a proof-of-concept measurement of ultrafast photoacoustics in which we use MASOPS to scan a time delay of 1/20 of the pump pulse interval. The resulting noise floor is 20 times lower compared to conventional ASOPS, allowing for 20 times faster measurements. Furthermore, we show that by taking experimental noise characteristics into account, more traditional pump–probe methods can also be optimized.
Autor:innen und Institutionen
- Advanced Research Center for Nanolithography (ARCNL), Science Park 106, 1098 XG Amsterdam, The Netherlands.
- Department of Physics and Astronomy, Vrije Universiteit, De Boelelaan 1081, 1081 HV Amsterdam, The Netherlands.
ORCID-Profile: M C Velsink, M Illienko, S Witte
Förderung
- European Research Council
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek
- Horizon 2020 Framework Program
Zitieren
APA
Velsink, M. C., Illienko, M., Sudera, P., & Witte, S. (2023). Optimizing pump–probe reflectivity measurements of ultrafast photoacoustics with modulated asynchronous optical sampling. Review of Scientific Instruments, 94(10). https://doi.org/10.1063/5.0155006
Vancouver
Velsink MC, Illienko M, Sudera P, Witte S. Optimizing pump–probe reflectivity measurements of ultrafast photoacoustics with modulated asynchronous optical sampling. Review of Scientific Instruments. 2023;94(10). doi:10.1063/5.0155006
BibTeX
@article{Velsink2023,
author = {Velsink, M C and Illienko, M and Sudera, P and Witte, S},
title = {Optimizing pump–probe reflectivity measurements of ultrafast photoacoustics with modulated asynchronous optical sampling},
journal = {Review of Scientific Instruments},
year = {2023},
volume = {94},
number = {10},
doi = {10.1063/5.0155006}
}
EUVIMED