EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Induction heating for desorption of surface contamination for high-repetition laser-driven carbon-ion acceleration

Sadaoki Kojima, Tatsuhiko Miyatake, Hironao Sakaki, Hiroyoshi Kuroki, Yusuke Shimizu, Hisanori Harada, Norihiro Inoue, Thanh Hung Dinh, Masayasu Hata, Noboru Hasegawa, Michiaki Mori, Masahiko Ishino und 6 weitere

Matter and Radiation at Extremes · 01.09.2023 · 8 (5)

DOI: 10.1063/5.0153578 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Matter and Radiation at Extremes, online erschienen am 28.07.2023. Verfasst von Sadaoki Kojima und 17 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: JST-Mirai Program, Ministry of Education, Culture, Sports, Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study reports the first experimental demonstration of surface contamination cleaning from a high-repetition supply of thin-tape targets for laser-driven carbon-ion acceleration. The adsorption of contaminants containing protons, mainly water vapor and hydrocarbons, on the surface of materials exposed to low vacuum (>10−3 Pa) suppresses carbon-ion acceleration. The newly developed contamination cleaner heats a 5-μm-thick nickel tape to over 400 °C in 100 ms by induction heating. In the future, this heating method could be scaled to laser-driven carbon-ion acceleration at rates beyond 10 Hz. The contaminant hydrogen is eliminated from the heated nickel surface, and a carbon source layer—derived from the contaminant carbon—is spontaneously formed by the catalytic effect of nickel. The species of ions accelerated from the nickel film heated to various temperatures have been observed experimentally. When the nickel film is heated beyond ∼150 °C, the proton signal considerably decreases, with a remarkable increase in the number and energy of carbon ions. The Langmuir adsorption model adequately explains the temperature dependence of desorption and re-adsorption of the adsorbed molecules on a heated target surface, and the temperature required for proton-free carbon-ion acceleration can be estimated.

Förderung

  • JST-Mirai Program
  • Ministry of Education, Culture, Sports, Science and Technology

Zitieren

APA

Kojima, S., Miyatake, T., Sakaki, H., Kuroki, H., Shimizu, Y., Harada, H., Inoue, N., Dinh, T. H., Hata, M., Hasegawa, N., Mori, M., Ishino, M., Nishiuchi, M., Kondo, K., Nishikino, M., Kando, M., Shirai, T., & Kondo, K. (2023). Induction heating for desorption of surface contamination for high-repetition laser-driven carbon-ion acceleration. Matter and Radiation at Extremes, 8(5). https://doi.org/10.1063/5.0153578

Vancouver

Kojima S, Miyatake T, Sakaki H, Kuroki H, Shimizu Y, Harada H, et al. Induction heating for desorption of surface contamination for high-repetition laser-driven carbon-ion acceleration. Matter and Radiation at Extremes. 2023;8(5). doi:10.1063/5.0153578

BibTeX
@article{Kojima2023,
  author = {Kojima, Sadaoki and Miyatake, Tatsuhiko and Sakaki, Hironao and Kuroki, Hiroyoshi and Shimizu, Yusuke and Harada, Hisanori and Inoue, Norihiro and Dinh, Thanh Hung and Hata, Masayasu and Hasegawa, Noboru and Mori, Michiaki and Ishino, Masahiko and Nishiuchi, Mamiko and Kondo, Kotaro and Nishikino, Masaharu and Kando, Masaki and Shirai, Toshiyuki and Kondo, Kiminori},
  title = {Induction heating for desorption of surface contamination for high-repetition laser-driven carbon-ion acceleration},
  journal = {Matter and Radiation at Extremes},
  year = {2023},
  volume = {8},
  number = {5},
  doi = {10.1063/5.0153578}
}
Kostenlos starten →