EUVIMEDEUVIMED entdecken
Crossref

High precision control of laser energy for laser–matter interaction studies

Xiaoming Wang iD, Jun Zhang iD, John Sethian iD

Review of Scientific Instruments · 2023

DOI: 10.1063/5.0149115 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Review of Scientific Instruments, 2023. Verfasst von Xiaoming Wang und 2 weiteren Autor:innen. Beteiligte Einrichtung: Dynamic Compression Sector, Institute for Shock Physics, Washington State University, Argonne National Laboratory, Lemont, Illinois 60439, USA. Hauptthemen laut MEDLINE: Lasers, Optics and Photonics. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 14 Literaturangaben. Gefördert von: Office of Defense Programs, Office of Science.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Precise, highly reproducible control of the laser energy is required for high confidence laser–matter interaction research such as in dynamic compression science and high energy density physics. The energy must be adjustable without affecting the pulse shape (time varying intensity) or beam smoothness. We have developed a convenient two-stage energy tuning method for a nominal 100 J, 351 nm (UV) laser. The energy is adjusted in 10 J (10%) increments by operating the laser at full energy and inserting a beam splitter in the laser output. As the splitter is located after the final frequency tripling optics, the UV pulse shape is unchanged. The energy is varied by substituting a splitter of different reflectivity. For finer 3 J (3%) increments, the infrared pulse is attenuated inside the laser before the final amplifier. This requires modest tuning to preserve the pulse shape. The demonstrated variation in shot-to-shot reproducibility is less than +/−2.5 J (5% of the full energy), irrespective of the laser output energy. These approaches can be adapted to most ∼100 J class lasers. We describe these techniques and show two examples where they have elucidated the underlying physics in laser shock compression experiments. One used only the beam splitters to establish the pressure for melting in iron. The other combined both techniques to finely increment the peak stress (∼2 GPa steps) in germanium to precisely determine the onset and completion of melting—including the melting kinetics. These unambiguous results would not be possible without the developments described here.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

LasersOptics and PhotonicsReproducibility of ResultsPhysical PhenomenaTime Factors

Autor:innen und Institutionen

  • Dynamic Compression Sector, Institute for Shock Physics, Washington State University, Argonne National Laboratory, Lemont, Illinois 60439, USA.

ORCID-Profile: Xiaoming Wang, Jun Zhang, John Sethian

Förderung

  • Office of Defense Programs
  • Office of Science

Zitieren

APA

Wang, X., Zhang, J., & Sethian, J. (2023). High precision control of laser energy for laser–matter interaction studies. Review of Scientific Instruments. https://doi.org/10.1063/5.0149115

Vancouver

Wang X, Zhang J, Sethian J. High precision control of laser energy for laser–matter interaction studies. Review of Scientific Instruments. 2023. doi:10.1063/5.0149115

BibTeX
@article{Wang2023,
  author = {Wang, Xiaoming and Zhang, Jun and Sethian, John},
  title = {High precision control of laser energy for laser–matter interaction studies},
  journal = {Review of Scientific Instruments},
  year = {2023},
  doi = {10.1063/5.0149115}
}
Kostenlos starten →