Lattice distortion in FCC HEAs and its effect on mechanical properties: Critical analysis and way forward
Journal of Applied Physics · 21.04.2023 · 133 (15)
DOI: 10.1063/5.0144456 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Physics, online erschienen am 17.04.2023. Verfasst von Jitesh Kumar und 2 weiteren Autor:innen. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 48 Literaturangaben. Gefördert von: Science and Engineering Research Board.
Abstract (Originalsprache)
Lattice distortion is considered to be one of the four core effects in a multicomponent high-entropy alloy. However, their effect is least understood from experiment and theoretical standpoints. The present investigation revealed a unique way to understand this effect by combining experiments with density functional theory (DFT) calculations. A small amount of Al and Si were carefully added to the whole-solute matrix of Cantor alloys. The different-sized atomic species introduces a huge lattice distortion in the matrix, leading to a simultaneous improvement in yield strength (YS), ultimate tensile strength (UTS), and percent elongation. An extensive DFT simulation indicates that a lattice distortion is prominent in an Al-containing alloy, whereas Si does not induce a lattice distortion. However, Si leads to severe interlayer lattice distortion, caused by the displacement of Si, during twinning. This leads to the improvement of YS, UTS, and ductility. Lattice distortion and its variants play significant effects on the mechanical properties of high-entropy alloys (HEAs) in terms of local lattice distortion, providing an uneven energy landscape for the movement of line defects or interlayer distortion. The inherent nature of local lattice distortion in HEAs leads to the wavy or tortuous dislocation, unlike a straight dislocation in conventional alloys. The movement of the wavy type of dislocation through a distorted or defective lattice requires large stress, resulting in a pronounced effect on solid solution strengthening. This local lattice distortion also dictates the degree of the interlayer distance distortion in the vicinity of atoms, leading to an increase or decrease in stable stacking fault energy that decides the deformation mode via slip or twinning.
Förderung
- Science and Engineering Research Board
Zitieren
APA
Kumar, J., Linda, A., & Biswas, K. (2023). Lattice distortion in FCC HEAs and its effect on mechanical properties: Critical analysis and way forward. Journal of Applied Physics, 133(15). https://doi.org/10.1063/5.0144456
Vancouver
Kumar J, Linda A, Biswas K. Lattice distortion in FCC HEAs and its effect on mechanical properties: Critical analysis and way forward. Journal of Applied Physics. 2023;133(15). doi:10.1063/5.0144456
BibTeX
@article{Kumar2023,
author = {Kumar, Jitesh and Linda, Albert and Biswas, Krishanu},
title = {Lattice distortion in FCC HEAs and its effect on mechanical properties: Critical analysis and way forward},
journal = {Journal of Applied Physics},
year = {2023},
volume = {133},
number = {15},
doi = {10.1063/5.0144456}
}
EUVIMED