EUVIMEDEUVIMED entdecken
Crossref

Study on defect imaging technology of optical elements based on micro-Raman spectroscopy

Feibin Wu iD, Jun Han iD

Review of Scientific Instruments · 01.06.2023 · 94 (6)

DOI: 10.1063/5.0143574 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 30.06.2023. Verfasst von Feibin Wu und 1 weiteren Autor:innen. Beteiligte Einrichtung: Quanzhou Institute of Equipment Manufacturing, Haixi Institutes, Chinese Academy of Sciences, Quanzhou, Fujian 362200, People's Republic of China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 23 Literaturangaben. Gefördert von: External Cooperation Program of Chinese Academy of Sciences, Fujian Science and Technology Innovation Laboratory for Optoelectronic Information, China, Fujian Provincial Science and Technology Project Fund.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An optical element defect detection imaging method based on micro-Raman spectroscopy is proposed to achieve high-precision imaging of optical element defects and their distribution. The detection precision of the system is immediately reflected in the imaging quality. The sharpness value of the mapping images is calculated using the Sum of Modulus of Gray Difference function. The selection of the Raman peak is an important step, and when a borosilicate glass sample with standard defects is measured for verification, it is found that the Raman peak light intensity changes at −37 and 28 cm−1. When these two peaks were used for 2D mapping, obvious defect contours can be obtained, while the light intensity at other sites could not be used for imaging, and remained essentially constant. Through the detection of laser burning defects, new peaks appear at the burned defect location that could be used for imaging, and the burning defect area can be clearly distinguished from the non-burning area. By changing the laser burning conditions, the Raman shift changes, which verifies that there is a certain correlation between the laser burning degree and the Raman shift, which also provides a basis for 2D mapping imaging of defect detection.

Autor:innen und Institutionen

  • Quanzhou Institute of Equipment Manufacturing, Haixi Institutes, Chinese Academy of Sciences, Quanzhou, Fujian 362200, People's Republic of China.
  • Fujian Science and Technology Innovation Laboratory for Optoelectronic Information of China, Fuzhou, Fujian 350108, People's Republic of China.

ORCID-Profile: Feibin Wu, Jun Han

Förderung

  • External Cooperation Program of Chinese Academy of Sciences
  • Fujian Science and Technology Innovation Laboratory for Optoelectronic Information, China
  • Fujian Provincial Science and Technology Project Fund
  • Quanzhou Science and Technology Project Fund

Zitieren

APA

Wu, F., & Han, J. (2023). Study on defect imaging technology of optical elements based on micro-Raman spectroscopy. Review of Scientific Instruments, 94(6). https://doi.org/10.1063/5.0143574

Vancouver

Wu F, Han J. Study on defect imaging technology of optical elements based on micro-Raman spectroscopy. Review of Scientific Instruments. 2023;94(6). doi:10.1063/5.0143574

BibTeX
@article{Wu2023,
  author = {Wu, Feibin and Han, Jun},
  title = {Study on defect imaging technology of optical elements based on micro-Raman spectroscopy},
  journal = {Review of Scientific Instruments},
  year = {2023},
  volume = {94},
  number = {6},
  doi = {10.1063/5.0143574}
}
Kostenlos starten →