EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Criterion for bubble encapsulation on drop impact onto a liquid film

D. Ribeiro, A. R. R. Silva, M. R. O. Panão

Physics of Fluids · 01.03.2023 · 35 (3)

DOI: 10.1063/5.0138901 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 06.03.2023. Verfasst von D. Ribeiro und 2 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e a Tecnologia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The phenomenon of bubble encapsulation results from droplet impact on a liquid film for specific impact conditions, but there is no established criterion for predicting its onset. Phenomenon visualization from two perspectives, the common lateral perspective and a bottom perspective, provided insights into the dynamics and formation mechanisms. Namely, the bottom shadowgraphs show capillary wavy patterns and perturbations imposed on the steady liquid film, which suggests a greater role of the liquid film in the onset of bubble encapsulation. Also, some considerations about the cavity development underneath the bubble limited by the solid wall allow concluding that the cavity shape is independent of the bubble encapsulation phenomenon. Additionally, using the bottom shadowgraphs, the crown closure time shows a systematic decrease in the dimensionless film thickness of 0.5<δf<0.6, which will be subject of future work. Finally, while most drop impact correlations focus on using the droplets' characteristics and thermophysical properties, the experimental results point in a different direction. Considering correlations relating the Ohnesorge and Reynolds numbers, the new criterion for the onset of bubble encapsulation uses drop characteristics and properties in the Reynolds number, while the liquid film thickness and thermophysical properties are used in the Ohnesorge number because most of the crown material comes from the liquid film. Therefore, the criterion based on 100% occurrence of bubble encapsulation is not a threshold, but a range: kbe=ln(34.5/ReD)/ln(Ohf), with kbe∈[1.022,1.142]. Other authors observed this phenomenon and despite being outside the validation range of this correlation, the values are close to their boundaries.

Förderung

  • Fundação para a Ciência e a Tecnologia

Zitieren

APA

Ribeiro, D., Silva, A. R. R., & Panão, M. R. O. (2023). Criterion for bubble encapsulation on drop impact onto a liquid film. Physics of Fluids, 35(3). https://doi.org/10.1063/5.0138901

Vancouver

Ribeiro D, Silva ARR, Panão MRO. Criterion for bubble encapsulation on drop impact onto a liquid film. Physics of Fluids. 2023;35(3). doi:10.1063/5.0138901

BibTeX
@article{Ribeiro2023,
  author = {Ribeiro, D. and Silva, A. R. R. and Panão, M. R. O.},
  title = {Criterion for bubble encapsulation on drop impact onto a liquid film},
  journal = {Physics of Fluids},
  year = {2023},
  volume = {35},
  number = {3},
  doi = {10.1063/5.0138901}
}
Kostenlos starten →