Frequency-domain probe beam deflection method for measurement of thermal conductivity of materials on micron length scale
Review of Scientific Instruments · 01.01.2023 · 94 (1)
DOI: 10.1063/5.0126717 ↗Kurz gefasst
Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 10.01.2023. Verfasst von Jinchi Sun und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering and Materials Research Laboratory, University of Illinois, Urbana, Illinois 61801, USA. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 40 Literaturangaben. Gefördert von: National Science Foundation.
Abstract (Originalsprache)
Time-domain thermoreflectance and frequency-domain thermoreflectance (FDTR) have been widely used for non-contact measurement of anisotropic thermal conductivity of materials with high spatial resolution. However, the requirement of a high thermoreflectance coefficient restricts the choice of metal coating and laser wavelength. The accuracy of the measurement is often limited by the high sensitivity to the radii of the laser beams. We describe an alternative frequency-domain pump-probe technique based on probe beam deflection. The beam deflection is primarily caused by thermoelastic deformation of the sample surface, with a magnitude determined by the thermal expansion coefficient of the bulk material to measure. We derive an analytical solution to the coupled elasticity and heat diffusion equations for periodic heating of a multilayer sample with anisotropic elastic constants, thermal conductivity, and thermal expansion coefficients. In most cases, a simplified model can reliably describe the frequency dependence of the beam deflection signal without knowledge of the elastic constants and thermal expansion coefficients of the material. The magnitude of the probe beam deflection signal is larger than the maximum magnitude achievable by thermoreflectance detection of surface temperatures if the thermal expansion coefficient is greater than 5 × 10−6 K−1. The uncertainty propagated from laser beam radii is smaller than that in FDTR when using a large beam offset. We find a nearly perfect matching of the measured signal and model prediction, and measure thermal conductivities within 6% of accepted values for materials spanning the range of polymers to gold, 0.1–300 W/(m K).
Autor:innen und Institutionen
- Department of Materials Science and Engineering and Materials Research Laboratory, University of Illinois, Urbana, Illinois 61801, USA.
ORCID-Profile: Jinchi Sun, Guangxin Lv, David G Cahill
Förderung
- National Science Foundation
Zitieren
APA
Sun, J., Lv, G., & Cahill, D. G. (2023). Frequency-domain probe beam deflection method for measurement of thermal conductivity of materials on micron length scale. Review of Scientific Instruments, 94(1). https://doi.org/10.1063/5.0126717
Vancouver
Sun J, Lv G, Cahill DG. Frequency-domain probe beam deflection method for measurement of thermal conductivity of materials on micron length scale. Review of Scientific Instruments. 2023;94(1). doi:10.1063/5.0126717
BibTeX
@article{Sun2023,
author = {Sun, Jinchi and Lv, Guangxin and Cahill, David G},
title = {Frequency-domain probe beam deflection method for measurement of thermal conductivity of materials on micron length scale},
journal = {Review of Scientific Instruments},
year = {2023},
volume = {94},
number = {1},
doi = {10.1063/5.0126717}
}
EUVIMED