Piezoelectric bimorph MEMS speakers
Nanotechnology and Precision Engineering · 01.09.2022 · 5 (3)
DOI: 10.1063/10.0013406 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanotechnology and Precision Engineering, online erschienen am 15.08.2022. Verfasst von Yiming Lang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
One of the key requirements for MEMS speakers is to increase the sound pressure level (SPL) while keeping the size as small as possible. In this paper we present a MEMS speaker based on piezoelectric bimorph cantilevers that produces a higher SPL than conventional unimorph cantilever speakers. The active diaphragm size is 1.4 × 1.4 mm2. The bimorph cantilevers are connected in parallel to make full use of the actuation voltage. At 1 kHz, the measured SPL reached 73 dB and the peak SPL reached 102 dB at the resonance frequency of 10 kHz in a 711 ear simulator under a driving voltage of 10 Vrms. The total harmonic distortion of the MEMS speaker was less than 3% in the range from 100 Hz to 20 kHz. Although the absolute SPL was not the highest, this work provides a better SPL for all piezoelectric MEMS speakers.
Zitieren
APA
Lang, Y., Liu, C., Fawzy, A., Sun, C., Gong, S., & Zhang, M. (2022). Piezoelectric bimorph MEMS speakers. Nanotechnology and Precision Engineering, 5(3). https://doi.org/10.1063/10.0013406
Vancouver
Lang Y, Liu C, Fawzy A, Sun C, Gong S, Zhang M. Piezoelectric bimorph MEMS speakers. Nanotechnology and Precision Engineering. 2022;5(3). doi:10.1063/10.0013406
BibTeX
@article{Lang2022,
author = {Lang, Yiming and Liu, Chengze and Fawzy, Ahmed and Sun, Chen and Gong, Shaobo and Zhang, Menglun},
title = {Piezoelectric bimorph MEMS speakers},
journal = {Nanotechnology and Precision Engineering},
year = {2022},
volume = {5},
number = {3},
doi = {10.1063/10.0013406}
}
EUVIMED