EUVIMEDEUVIMED entdecken
Crossref

Machine Learning–Aided Prediction of Shaft Resistance and Bearing Capacity Factors for Pile Foundation Design Using CPT Data

Ahmed Elsawwaf, Hany El Naggar

Journal of Structural Design and Construction Practice · 01.11.2026 · 31 (4)

DOI: 10.1061/jsdccc.sceng-2150 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Structural Design and Construction Practice, erschienen am 01.11.2026. Verfasst von Ahmed Elsawwaf und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 80 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a data-driven framework for predicting the shaft resistance ( β ) and end bearing capacity ( N t ) factors of piles using cone penetration test (CPT) data. Traditional design methods often rely on empirical values that oversimplify soil–pile interaction by neglecting the influence of pile geometry. To address this, this research employs an evolutionary polynomial regression with a multiobjective genetic algorithm (EPR-MOGA) to develop design equations. A two-step methodology was used: first, robust models for shaft capacity ( Q s ) and end-bearing capacity ( Q t ) of drilled piles were developed from databases of 54 and 31 load tests, respectively. Validated using fivefold cross-validation, these base models demonstrated high predictive accuracy, achieving an average coefficient of determination of 0.92 for Q s and 0.97 for Q t . Explicit equations for the β and N t factors were then derived from these validated models. These equations inherently account for complex soil–pile interactions, showing increases with soil friction angle and reductions with pile slenderness ratio ( L / D ) at a diminishing rate. This eliminates the need for the additional caps on effective vertical stress required by conventional methods. Finally, the models were extended to driven piles by calibrating modification factors on an independent 36-test database, yielding values of 1.46 for Q s and 2.38 for Q t .

Zitieren

APA

Elsawwaf, A., & Naggar, H. E. (2026). Machine Learning–Aided Prediction of Shaft Resistance and Bearing Capacity Factors for Pile Foundation Design Using CPT Data. Journal of Structural Design and Construction Practice, 31(4). https://doi.org/10.1061/jsdccc.sceng-2150

Vancouver

Elsawwaf A, Naggar HE. Machine Learning–Aided Prediction of Shaft Resistance and Bearing Capacity Factors for Pile Foundation Design Using CPT Data. Journal of Structural Design and Construction Practice. 2026;31(4). doi:10.1061/jsdccc.sceng-2150

BibTeX
@article{Elsawwaf2026,
  author = {Elsawwaf, Ahmed and Naggar, Hany El},
  title = {Machine Learning–Aided Prediction of Shaft Resistance and Bearing Capacity Factors for Pile Foundation Design Using CPT Data},
  journal = {Journal of Structural Design and Construction Practice},
  year = {2026},
  volume = {31},
  number = {4},
  doi = {10.1061/jsdccc.sceng-2150}
}
Kostenlos starten →