Modeling of Fatigue Behavior of RC Beams Strengthened in Shear with Embedded Through-Section FRP Bars
Journal of Composites for Construction · 01.02.2027 · 31 (1)
DOI: 10.1061/jccof2.cceng-5757 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composites for Construction, erschienen am 01.02.2027. Verfasst von Linh Van Hong Bui und 1 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben.
Abstract (Originalsprache)
This study presents an analytical investigation of the fatigue shear behavior of reinforced concrete (RC) beams strengthened with embedded through-section (ETS) fiber-reinforced polymer (FRP) bars. The flexural–shear deformation theory previously proposed by the authors is refined to analyze the beam behavior at a given loading cycle. Several fatigue approaches, including a stress‒life (S-N)-based approach, a fracture mechanics–based approach, and mixed models, are developed. The S-N method accounts for fatigue degradation of concrete and steel. Meanwhile, the fracture mechanics approach evaluates stress at shear crack tips and is then developed to incorporate the contributions of transverse steel and ETS-FRP bars by assessing the stress intensity factor. Mixed models couple concrete fatigue damage with dual steel crack growth rules. This study also examines the role of ETS-FRP bars in inhibiting stirrup crack propagation under fatigue. The results showed that the proposed fatigue frameworks accurately predicted the deflection responses of beams under cyclic loading. Computed displacements matched experiments in the initial and stable stages, particularly beams without failure, while beams that failed exhibited log( N f_pred )/log( N f_exp ) ≈ 1.0. Mixed-model formulations captured the rapid deflection increase near failure. Predicted shear reinforcement strains and postfatigue load–deflection behavior of unstrengthened and strengthened beams agreed well with the measurements. The mean predicted-to-experimental remaining shear capacities ranged from 0.80 to 0.85, with coefficients of variation below 30%, demonstrating the models’ reliability and consistency.
Zitieren
APA
Bui, L. V. H., & Le, T. A. (2027). Modeling of Fatigue Behavior of RC Beams Strengthened in Shear with Embedded Through-Section FRP Bars. Journal of Composites for Construction, 31(1). https://doi.org/10.1061/jccof2.cceng-5757
Vancouver
Bui LVH, Le TA. Modeling of Fatigue Behavior of RC Beams Strengthened in Shear with Embedded Through-Section FRP Bars. Journal of Composites for Construction. 2027;31(1). doi:10.1061/jccof2.cceng-5757
BibTeX
@article{Bui2027,
author = {Bui, Linh Van Hong and Le, Tuan Anh},
title = {Modeling of Fatigue Behavior of RC Beams Strengthened in Shear with Embedded Through-Section FRP Bars},
journal = {Journal of Composites for Construction},
year = {2027},
volume = {31},
number = {1},
doi = {10.1061/jccof2.cceng-5757}
}
EUVIMED