EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Stress Distribution Pattern in Implant-Assisted Removable Partial Denture (IARPD): A 3D Finite Element Analysis

Sanjog Agarwal, Subhabrata Maiti, Jessy Paulraj, Mario Alberto Alarcón-Sánchez, Artak Heboyan, Sarah Monserrat Lomelí-Martínez, Juan José Varela-Hernández

European Journal of General Dentistry · 28.09.2026

DOI: 10.1055/s-0046-1825864 ↗

Kurz gefasst

Fachartikel in der Zeitschrift European Journal of General Dentistry, erschienen am 28.09.2026. Verfasst von Sanjog Agarwal und 6 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Removable partial dentures (RPDs) held in place by clasps have become a favored option for treating patients with partial tooth loss. However, these dentures have their drawbacks, including the issue of frequent displacement, which can lead to patient dissatisfaction and decreased usage, especially in situations involving the back of the lower jaw. The study aimed to examine the stress distribution pattern in implant-assisted RPDs (IARPDs). A computed tomographic scan of data from an edentulous patient was used to simulate a finite element three-dimensional (3D) model of the edentulous mandible. Using 3D modeling software (solid edge software, Siemens PLM software, United States), threaded implants and abutments were duplicated, and a framework was created. A 200 N axial and nonaxial stress was applied unilaterally and bilaterally. Higher stress concentrations were observed under unilateral loading compared with bilateral loading for all attachment systems. Under bilateral loading, locator attachments demonstrated the lowest implant stress (8.00 MPa) and reduced stress transfer to the surrounding bone. Under unilateral loading, healing caps exhibited the lowest implant stress (23.8 MPa), whereas ball attachments generated the highest stress values (44.4 MPa). Bilateral ball attachments showed the lowest framework stress (5.91 MPa) and prosthesis deformation (0.018 mm). Bilateral implant-assisted configurations demonstrated more favorable stress distribution than unilateral loading conditions. Locator attachments were most effective in minimizing stress transfer to the implant and surrounding bone under bilateral loading. In unilateral scenarios, ball attachments exhibited comparatively lower stress concentrations. These findings may assist clinicians in selecting appropriate attachment systems; however, clinical validation is required before definitive recommendations can be made.

Zitieren

APA

Agarwal, S., Maiti, S., Paulraj, J., Alarcón-Sánchez, M. A., Heboyan, A., Lomelí-Martínez, S. M., & Varela-Hernández, J. J. (2026). Stress Distribution Pattern in Implant-Assisted Removable Partial Denture (IARPD): A 3D Finite Element Analysis. European Journal of General Dentistry. https://doi.org/10.1055/s-0046-1825864

Vancouver

Agarwal S, Maiti S, Paulraj J, Alarcón-Sánchez MA, Heboyan A, Lomelí-Martínez SM, et al. Stress Distribution Pattern in Implant-Assisted Removable Partial Denture (IARPD): A 3D Finite Element Analysis. European Journal of General Dentistry. 2026. doi:10.1055/s-0046-1825864

BibTeX
@article{Agarwal2026,
  author = {Agarwal, Sanjog and Maiti, Subhabrata and Paulraj, Jessy and Alarcón-Sánchez, Mario Alberto and Heboyan, Artak and Lomelí-Martínez, Sarah Monserrat and Varela-Hernández, Juan José},
  title = {Stress Distribution Pattern in Implant-Assisted Removable Partial Denture (IARPD): A 3D Finite Element Analysis},
  journal = {European Journal of General Dentistry},
  year = {2026},
  doi = {10.1055/s-0046-1825864}
}
Kostenlos starten →