The Effect of Cementation Load, Unload Time, and Storage Time on Film Thickness and Microtensile Bond Strength Durability of Dual-Cure Resin Cements: An In Vitro Study
European Journal of Dentistry · 16.02.2026
DOI: 10.1055/s-0046-1816082 ↗Kurz gefasst
Fachartikel in der Zeitschrift European Journal of Dentistry, erschienen am 16.02.2026. Verfasst von Salvatore Sauro und 4 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Odontologia, Facultad de Ciencias de la Salud, Universidad CEU Cardenal Herrera, Valencia, Spain. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This article aims to evaluate the effect of load weight, unload time, and storage duration on microtensile bond strength (µTBS) of dual-cure resin cement to CAD/CAM composite. Forty-eight composite blocks (Grandio Blocs, n = 24 shade A1, and n = 24 shade A4) were randomly assigned to eight groups (n = 3 shade A1, and n = 3 shade A4) based on load weight (1, 3, 5, and 15 kg), and unload time (immediately before light curing or 10 minutes during/after light curing). Bonded blocks (n = 3/group) were sectioned into multiple sticks. Half of the sticks (n = 21) were tested after 24 hours, while the remaining 21 were stored in distilled water at 37°C and tested after 6 months. Sticks for film thickness were evaluated using a stereomicroscope (60 × ). However, the sticks for µTBS were pulled in tension at a 0.5-mm/min crosshead speed. Data were analyzed using ANOVA and the Games–Howell post hoc test (α = 0.05). There was no correlation between µTBS and FT (r = 0.035; p = 0.737). For the FT, only “unload time” had a significant effect (p < 0.001). For µTBS, “load weight,” and “unload time” had no significant impact (p = 0.948 and p = 0.948, respectively). However, “storage time” significantly influenced the results (p < 0.001). Adhesive mode was significantly predominant (56.85%). Unload time is a crucial factor controlling the film thickness of the dual-cure resin cement. However, it does not affect the resin cement µTBS to CAD/CAM composite. Excessive seating load should be avoided when positioning CAD/CAM composite restorations, while a controlled short time may assist in preventing restoration rebound.
Autor:innen und Institutionen
- Departamento de Odontologia, Facultad de Ciencias de la Salud, Universidad CEU Cardenal Herrera, Valencia, Spain.
- Institute of Dentistry, I. M. Sechenov First Moscow State Medical University, Moscow, Russia.
- Department of Operative Dentistry, Egyptian-Russian University, Cairo, Egypt.
- Department of Operative Dentistry, Ain Shams University, Cairo, Egypt.
- Department of Restorative Dentistry, The British University in Egypt, Cairo, Egypt.
ORCID-Profile: Salvatore Sauro, Abdullah Hassanien, Sara A Botros
Zitieren
APA
Sauro, S., Hassanien, A., Tadros, N. M., Botros, S. A., & El-Askary, F. S. (2026). The Effect of Cementation Load, Unload Time, and Storage Time on Film Thickness and Microtensile Bond Strength Durability of Dual-Cure Resin Cements: An In Vitro Study. European Journal of Dentistry. https://doi.org/10.1055/s-0046-1816082
Vancouver
Sauro S, Hassanien A, Tadros NM, Botros SA, El-Askary FS. The Effect of Cementation Load, Unload Time, and Storage Time on Film Thickness and Microtensile Bond Strength Durability of Dual-Cure Resin Cements: An In Vitro Study. European Journal of Dentistry. 2026. doi:10.1055/s-0046-1816082
BibTeX
@article{Sauro2026,
author = {Sauro, Salvatore and Hassanien, Abdullah and Tadros, Nader M and Botros, Sara A and El-Askary, Farid S},
title = {The Effect of Cementation Load, Unload Time, and Storage Time on Film Thickness and Microtensile Bond Strength Durability of Dual-Cure Resin Cements: An In Vitro Study},
journal = {European Journal of Dentistry},
year = {2026},
doi = {10.1055/s-0046-1816082}
}
EUVIMED