Biomechanical Evaluation of Stress Distribution in a Natural Tooth Adjacent to a Dental Implant Using Finite Element Modeling
European Journal of General Dentistry · 01.09.2025 · 14 (03) · 308-320
DOI: 10.1055/s-0044-1800841 ↗Kurz gefasst
Fachartikel in der Zeitschrift European Journal of General Dentistry, erschienen am 01.09.2025. Verfasst von Kunyawan Thaungwilai und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Emerging evidence suggests an increased incidence of mechanical complications in natural teeth, particularly maxillary premolars, adjacent to dental implants. This study aimed to investigate and compare the maximum von Mises stress induced in a natural tooth adjacent to either a natural tooth or a dental implant under different occlusal loading and interproximal space conditions. Three-dimensional finite element models of maxillary first and second premolars were generated for both control (two natural teeth) and experimental (first premolar dental implant and natural second premolar) groups to analyze stress levels and distributions. Occlusal forces were applied to the second premolar, and the resulting maximum von Mises stress was compared between groups. The influence of dental implant presence, interproximal space, and occlusal load contact position and direction on the stress level and distribution in the loaded tooth was investigated. Compared with the control group, the experimental group exhibited higher stress levels in the natural second premolar under occlusal forces, although the stress distribution remained similar. The presence of interproximal spaces, either between natural teeth or between a tooth and an implant, exacerbated stress in the loaded teeth due to reduced proximal contact area and increased stress concentration. Additionally, the position and direction of occlusal force contact differentially affected the stress level, although not the stress distribution, within the experimental tooth group. Dental implants increase stress on adjacent natural teeth, particularly when interproximal space exists. Occlusal force direction and position influence stress in loaded natural teeth, whether adjacent to other natural teeth or implants. The results underscore the critical importance of comprehensive patient evaluation, meticulous treatment planning, and consistent maintenance in dental implant restorations to mitigate potential complications affecting adjacent natural teeth.
Zitieren
APA
Thaungwilai, K., Tantilertanant, Y., Tomeboon, P., Singhatanadgit, W., & Singhatanadgid, P. (2025). Biomechanical Evaluation of Stress Distribution in a Natural Tooth Adjacent to a Dental Implant Using Finite Element Modeling. European Journal of General Dentistry, 14(03), 308-320. https://doi.org/10.1055/s-0044-1800841
Vancouver
Thaungwilai K, Tantilertanant Y, Tomeboon P, Singhatanadgit W, Singhatanadgid P. Biomechanical Evaluation of Stress Distribution in a Natural Tooth Adjacent to a Dental Implant Using Finite Element Modeling. European Journal of General Dentistry. 2025;14(03):308-320. doi:10.1055/s-0044-1800841
BibTeX
@article{Thaungwilai2025,
author = {Thaungwilai, Kunyawan and Tantilertanant, Yanee and Tomeboon, Punyavud and Singhatanadgit, Weerachai and Singhatanadgid, Pairod},
title = {Biomechanical Evaluation of Stress Distribution in a Natural Tooth Adjacent to a Dental Implant Using Finite Element Modeling},
journal = {European Journal of General Dentistry},
year = {2025},
volume = {14},
number = {03},
pages = {308--320},
doi = {10.1055/s-0044-1800841}
}
EUVIMED