Endoscopic retrograde cholangiopancreatography training using a silicone simulator fabricated using a 3D printing technique
Endoscopy · 01.04.2024 · 56 (S 02 S 02) · S126-S127
DOI: 10.1055/s-0044-1782967 ↗Kurz gefasst
Fachartikel in der Zeitschrift Endoscopy, erschienen am 01.04.2024. Verfasst von C. I. Kwon und 9 weiteren Autor:innen. Die Arbeit nennt 2 Literaturangaben.
Abstract (Originalsprache)
Aims
Endoscopic retrograde cholangiopancreatography (ERCP) training remains challenging; no suitable training model properly simulates the anatomical and realistic features encountered during the procedure. This study used 3D printing techniques to develop and optimize a portable ERCP training simulator and to implement basic and advanced practical techniques. Subsequently, we aimed to determine whether endoscopy trainees acquired proficiency in ERCP techniques and assess any improvements in their skill levels from using this model.
Methods
An ERCP training model was generated using 3D printing techniques, including five distinct interchangeable and transparent ampullar–common bile duct (CBD) modules. A prospective study using this model was conducted with ten trainees. The technical success rate and examination times for duodenoscope insertion and biliary cannulation were evaluated. In addition, the successful plastic-stent insertion rate and trainee satisfaction were measured.
Results
These training models simulated all steps of the ERCP procedure; fluoroscopic guidance was not required because of the transparency of the ampulla-CBD module. The success rates for duodenoscopy, cannulation, and plastic stent insertion were 94, 100, and 92%, respectively. The mean satisfaction scores for duodenoscope insertion, cannulation, and plastic stent insertion were 4.4, 4.7, and 4.6 on a 5-point scale, respectively. Five attempts decreased the insertion time (R=−0.591, P
Zitieren
APA
Kwon, C. I., Shin, S. P., Lee, K. J., Sung, M. J., Kim, J. C., Kim, G. B., Kim, M. Y., Han, S. Y., Jang, S. I., & Takenaka, M. (2024). Endoscopic retrograde cholangiopancreatography training using a silicone simulator fabricated using a 3D printing technique. Endoscopy, 56(S 02 S 02), S126-S127. https://doi.org/10.1055/s-0044-1782967
Vancouver
Kwon CI, Shin SP, Lee KJ, Sung MJ, Kim JC, Kim GB, et al. Endoscopic retrograde cholangiopancreatography training using a silicone simulator fabricated using a 3D printing technique. Endoscopy. 2024;56(S 02 S 02):S126-S127. doi:10.1055/s-0044-1782967
BibTeX
@article{Kwon2024,
author = {Kwon, C. I. and Shin, S. P. and Lee, K. J. and Sung, M. J. and Kim, J. C. and Kim, G. B. and Kim, M. Y. and Han, S. Y. and Jang, S. I. and Takenaka, M.},
title = {Endoscopic retrograde cholangiopancreatography training using a silicone simulator fabricated using a 3D printing technique},
journal = {Endoscopy},
year = {2024},
volume = {56},
number = {S 02 S 02},
pages = {S126--S127},
doi = {10.1055/s-0044-1782967}
}
EUVIMED