Hologram-Based Craniectomy for Resection of an Extensive En Plaque Meningioma Compared to 3D-Printed Resection Template
Journal of Neurological Surgery Part B: Skull Base · 01.02.2024 · 85 (S 01 S 01) · S1-S398
DOI: 10.1055/s-0044-1780360 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Neurological Surgery Part B: Skull Base, erschienen am 01.02.2024. Verfasst von Alexander Kuffer und 4 weiteren Autor:innen.
Abstract (Originalsprache)
Introduction
Skull base approaches for managing complex pathologies often entail substantial bone removal, posing challenges for cranial vault reconstruction due to bone loss during drilling. The resulting bone flap is frequently insufficient in size and necessitates extension with titanium mesh or fixation plates. This reconstruction process is labor-intensive, costly, and often suboptimal both cosmetically and functionally. In cases involving pathologic conditions such as en plaque meningioma infiltrating bone, post-surgery bone flap repositioning is unfeasible. Patient-specific skull implants offer a valuable solution; however, they require precise preoperative determination of craniotomy dimensions and removed bone. Close collaboration between the surgeon and implant manufacturer can yield an optimal implant design. Ensuring the implant fits precisely within the cranial defect necessitates precise craniotomy following the implant’s shape. Therefore, additional resection templates are created using 3D printing technology. These templates are cost-intensive, and their accurate placement on the cranial vault entails a nonnegligible margin of error due to the spherical shape of the human skull. Using a hologram of the implant as a craniectomy template offers an elegant alternative, obviating the need for a 3D-printed template.
Method
In a case study involving a 51-year-old female patient suffering from a rapidly progressing left parieto-occipital en plaque meningioma, we compared template-guided resection with hologram-based mixed reality resection. The surgeon determined the craniectomy’s extent before the procedure, relying on available CT and MR imaging. A polyetheretherketone PEEK implant was manufactured to match the planned craniectomy defect. Additionally, the implant manufacturer created a resection template using 3D printing technology. Automatic segmentation of relevant intracranial anatomical structures was performed using MRI data and a validated expanding meshes algorithm. The resulting hologram was matched with the hologram generated from the cranial implant’s 3D file. Mixed reality glasses visualized the hologram, enabling the surgeon to interact with it during patient positioning, skin incision, and craniectomy. The extent of the craniectomy was initially marked on the skull using the 3D-printed template, followed by validation based on the hologram.
Results
The patient-specific 3D hologram aided in patient positioning, incision planning, and craniectomy. Intraoperative analysis confirmed the holographic model’s accuracy compared with the 3D-printed template, demonstrating precise localization of tumor borders and corresponding craniectomy dimensions.
Conclusion
Hologram-based craniectomy, in terms of size and positioning, is not inferior to template-guided craniotomy. In cases of spherical craniotomies, holograms can offer clearer positioning guidance compared with challenging-to-position templates. In addition to 3D printed templates, holograms assist in surgical planning, patient positioning, determining the skin incision site, intraoperative trajectory planning, and patient education. Publication History Article published online: 05 February 2024 © 2024. Thieme. All rights reserved. Georg Thieme Verlag KG Rüdigerstraße 14, 70469 Stuttgart, Germany
Zitieren
APA
Kuffer, A., Stauffer, A., Colombo, E., Dehdashti, A. R., & Regli, L. (2024). Hologram-Based Craniectomy for Resection of an Extensive En Plaque Meningioma Compared to 3D-Printed Resection Template. Journal of Neurological Surgery Part B: Skull Base, 85(S 01 S 01), S1-S398. https://doi.org/10.1055/s-0044-1780360
Vancouver
Kuffer A, Stauffer A, Colombo E, Dehdashti AR, Regli L. Hologram-Based Craniectomy for Resection of an Extensive En Plaque Meningioma Compared to 3D-Printed Resection Template. Journal of Neurological Surgery Part B: Skull Base. 2024;85(S 01 S 01):S1-S398. doi:10.1055/s-0044-1780360
BibTeX
@article{Kuffer2024,
author = {Kuffer, Alexander and Stauffer, Alexandra and Colombo, Elisa and Dehdashti, Amir R. and Regli, Luca},
title = {Hologram-Based Craniectomy for Resection of an Extensive En Plaque Meningioma Compared to 3D-Printed Resection Template},
journal = {Journal of Neurological Surgery Part B: Skull Base},
year = {2024},
volume = {85},
number = {S 01 S 01},
pages = {S1--S398},
doi = {10.1055/s-0044-1780360}
}
EUVIMED