Finite Element Comparison of Unilateral and Bilateral Polymethylmethacrylate Vertebral Fixation in the Canine Thoracolumbar Spine
Veterinary and Comparative Orthopaedics and Traumatology · 19.11.2026
DOI: 10.1055/a-2996-1279 ↗Kurz gefasst
Fachartikel in der Zeitschrift Veterinary and Comparative Orthopaedics and Traumatology, online erschienen am 19.11.2026. Verfasst von Yuki Kikuchi und 3 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study aimed to perform a theoretical finite element analysis comparing the biomechanical effects of unilateral (uni-VF) and bilateral vertebral fixation (bi-VF) using polymethylmethacrylate following individualized mini-hemilaminectomy–corpectomy (iMHC) of the canine thoracolumbar spine, focusing on range of motion and stress distribution. Using computed tomography data from a healthy Beagle dog, the following three-dimensional finite element models of the T12–L4 vertebrae were generated: (1) intact, (2) left-sided iMHC without fixation, (3) uni-VF (left side only) using 2.4-mm locking head screws embedded in polymethylmethacrylate after left-sided iMHC and (4) bi-VF using bilateral 2.4-mm locking head screws and polymethylmethacrylate after left-sided iMHC. Each model was subjected to a pure moment force equal to 2 N × m in six directions. Range of motion and equivalent stress were quantified and visualized at both treated and adjacent intervertebral levels. At the treated level, bi-VF resulted in markedly lower range of motion than uni-VF, accompanied by small increases in adjacent-segment range of motion. Equivalent stress in adjacent discs was slightly higher following bi-VF than following uni-VF but remained small relative to the reduction in range of motion at the treated level. Bilateral vertebral fixation provided greater stabilization than uni-VF. Under the evaluated conditions, the associated increases in adjacent-segment range of motion and stress were minimal, indicating a limited biomechanical increase in adjacent-segment loading.
Zitieren
APA
Kikuchi, Y., Takahashi, F., Yamaguchi, S., & Hara, Y. (2026). Finite Element Comparison of Unilateral and Bilateral Polymethylmethacrylate Vertebral Fixation in the Canine Thoracolumbar Spine. Veterinary and Comparative Orthopaedics and Traumatology. https://doi.org/10.1055/a-2996-1279
Vancouver
Kikuchi Y, Takahashi F, Yamaguchi S, Hara Y. Finite Element Comparison of Unilateral and Bilateral Polymethylmethacrylate Vertebral Fixation in the Canine Thoracolumbar Spine. Veterinary and Comparative Orthopaedics and Traumatology. 2026. doi:10.1055/a-2996-1279
BibTeX
@article{Kikuchi2026,
author = {Kikuchi, Yuki and Takahashi, Fumitaka and Yamaguchi, Shinya and Hara, Yasushi},
title = {Finite Element Comparison of Unilateral and Bilateral Polymethylmethacrylate Vertebral Fixation in the Canine Thoracolumbar Spine},
journal = {Veterinary and Comparative Orthopaedics and Traumatology},
year = {2026},
doi = {10.1055/a-2996-1279}
}
EUVIMED