Patient-Specific Computed Tomography-Based Three-Dimensional Spine Trauma Models for Preoperative Planning in Virtual Reality and 3D Printing: An EANS Young Neurosurgeons' Network Study
Journal of Neurological Surgery Part A: Central European Neurosurgery · 01.05.2026 · 87 (03) · 197-206
DOI: 10.1055/a-2726-3537 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Neurological Surgery Part A: Central European Neurosurgery, erschienen am 01.05.2026. Verfasst von Martin Trandzhiev und 20 weiteren Autor:innen. Beteiligte Einrichtung: Department of Neurosurgery, Acibadem City Clinic University Hospital Tokuda, Sofia, Bulgaria. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Tomography, X-Ray Computed, Virtual Reality, Imaging, Three-Dimensional. Die Arbeit nennt 35 Literaturangaben.
Abstract (Originalsprache)
Lately, the wide availability of open-source modelling and rendering software in neurosurgery has led to the development of a methodological pipeline for creating patient-specific three-dimensional (3D) models based on preoperative imaging data. With recent innovations in virtual reality (VR) technology and 3D printing, these models can be applied to enhance preoperative planning and medical training. The main question this paper aims to answer is whether the proposed algorithm of intensity-based CT segmentation and basic 3D modelling is adequate to create a reference library of patient-specific models, categorized according to the AO Spine Injury Classification System, and suitable for VR and 3D printing-based preoperative planning. We used the open-source medical image viewer Horos to create volumetric renderings of CT scans of trauma patients from several European centers. The models were postprocessed using 3D modelling software and exported in appropriate formats for VR or 3D printing. We created 37 models of trauma patients, spanning from the upper cervical to the thoracolumbar segment, categorized according to the AO Spine Injury Classification System. Additionally, a remote case discussion conducted by uploading these models into a collaborative VR environment was demonstrated as a proof of concept. In the present study, we demonstrated that open-source software can create a database of patient-specific 3D models. Additionally, the communication between remote departments can be facilitated by uploading these models into a collaborative VR environment, and the comprehensive evaluation of spine fractures fostered through 3D printing. Further studies are needed to assess the database's educational value.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Autor:innen und Institutionen
- Department of Neurosurgery, Acibadem City Clinic University Hospital Tokuda, Sofia, Bulgaria.
- Department of Neurosurgery, Kantonsspital St. Gallen and Medical School of St. Gallen, St. Gallen, Switzerland.
- Spine Center of Eastern Switzerland, Kantonsspital St. Gallen and Medical School of St. Gallen, St. Gallen, Switzerland.
- Department of Neurosurgery, Policlinico "G.Rodolico - San Marco," University Hospital Catania, Catania, Italy.
- Department of Neurosurgery, Miulli General Regional Hospital, Acquaviva delle Fonti-Bari, Bari, Italy.
- Department of Neurosurgery, General University Hospital Attikon, Attikon University Hospital, Athens, Greece.
Zitieren
APA
Trandzhiev, M., Schulz, E., Stienen, M. N., Bozinov, O., Petralia, C., Vitaliti, C., Rossitto, M., Alvarado Flores, D., Barbagallo, G. M. V., Fanelli, V., Solou, M., Boviatsis, E. J., Dimopoulos, D., Sanker, V., Vogt, A., Nakov, V., Belo, D., Drosos, E., Gandía-González, M. L., …, & Raffa, G. (2026). Patient-Specific Computed Tomography-Based Three-Dimensional Spine Trauma Models for Preoperative Planning in Virtual Reality and 3D Printing: An EANS Young Neurosurgeons' Network Study. Journal of Neurological Surgery Part A: Central European Neurosurgery, 87(03), 197-206. https://doi.org/10.1055/a-2726-3537
Vancouver
Trandzhiev M, Schulz E, Stienen MN, Bozinov O, Petralia C, Vitaliti C, et al. Patient-Specific Computed Tomography-Based Three-Dimensional Spine Trauma Models for Preoperative Planning in Virtual Reality and 3D Printing: An EANS Young Neurosurgeons' Network Study. Journal of Neurological Surgery Part A: Central European Neurosurgery. 2026;87(03):197-206. doi:10.1055/a-2726-3537
BibTeX
@article{Trandzhiev2026,
author = {Trandzhiev, Martin and Schulz, Erik and Stienen, Martin N and Bozinov, Oliver and Petralia, Cateno and Vitaliti, Carmelo and Rossitto, Martina and Alvarado Flores, Daniel and Barbagallo, Giuseppe M V and Fanelli, Vincenzo and Solou, Mary and Boviatsis, Efstathios J and Dimopoulos, Dimitrios and Sanker, Vivek and Vogt, Antonia and Nakov, Vladimir and Belo, Diogo and Drosos, Evangelos and Gandía-González, Maria L and Spiriev, Toma and Raffa, Giovanni},
title = {Patient-Specific Computed Tomography-Based Three-Dimensional Spine Trauma Models for Preoperative Planning in Virtual Reality and 3D Printing: An EANS Young Neurosurgeons' Network Study},
journal = {Journal of Neurological Surgery Part A: Central European Neurosurgery},
year = {2026},
volume = {87},
number = {03},
pages = {197--206},
doi = {10.1055/a-2726-3537}
}
EUVIMED