EUVIMEDEUVIMED entdecken
Randomisierte kontrollierte StudieVergleichsstudieOpen Access · CC BY-NC-ND 4.0

A Novel Competency-Based Simulation Model for Thoracoscopic Lung Resection

Ein neuartiges kompetenzbasiertes Simulationsmodell für die thorakoskopische Lungenresektion

Ganwei Liu, Feng Yang, Zuli Zhou, Guanchao Jiang

The Thoracic and Cardiovascular Surgeon · 01.03.2026 · 74 (02) · 174-180

DOI: 10.1055/a-2702-2239 ↗

Auf einen Blick

Bei 52 chirurgischen Weiterbildungsassistent:innen verbesserte ein hochauflösendes 3D-gedrucktes Lungenmodell Anatomieverständnis, technische Leistung und Sicherheit stärker als ein konventioneller Boxtrainer.

Fragestellung

Verbessert ein hochauflösendes 3D-gedrucktes Lungenmodell die Ausbildung für thorakoskopische Lungenresektion im Vergleich zum FLS-Boxtrainer?

Methode

Randomisierte Studie mit 52 chirurgischen Weiterbildungsassistent:innen ohne thorakoskopische Erfahrung. Vergleich von hochauflösendem Lungenmodell und FLS-Boxtrainer; vor und nach Training Anatomietest, danach Wedge-Resektion im Tiermodell.

Ergebnisse

52 Teilnehmende: 26 pro Gruppe. Baseline ähnlich (65,42 ± 6,10 vs. 66,12 ± 5,92; p = 0,710). Nach Training bessere Anatomie (87,60 ± 4,75 vs. 78,19 ± 5,54; p < 0,001), OSATS (19,18 ± 2,43 vs. 15,41 ± 2,41; p < 0,001) und Vertrauen (3,13 ± 0,61 vs. 2,27 ± 0,68; p = 0,002).

Schlussfolgerung der Autor:innen

Hochauflösende 3D-gedruckte Lungenmodelle verbesserten Anatomieverständnis, thorakoskopische Fähigkeiten und Vertrauen im Vergleich zu konventionellen Boxtrainern.

Kernaussagen

  • 26 vs. 26 Teilnehmende
  • Posttraining bessere Anatomietests und OSATS mit dem Lungenmodell
  • Höhere Selbsteinschätzung der Sicherheit nach Training

Deutsche Zusammenfassung: KI-gestützt aus dem Original-Abstract erstellt; alle Zahlen wurden automatisch mit dem Original abgeglichen. Maßgeblich ist der Original-Abstract.

Kurz gefasst

Randomisierte kontrollierte Studie in der Zeitschrift The Thoracic and Cardiovascular Surgeon, erschienen am 01.03.2026. Verfasst von Ganwei Liu und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Thoracic Surgery, Peking University People's Hospital, Beijing, People's Republic of China. Hauptthemen laut MEDLINE: Clinical Competence, Models, Anatomic, Internship and Residency, Education, Medical, Graduate. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Natural Science Foundation of China, Peking University People's Hospital Scientific Research Development Funds.

Auf einen BlickAbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Simulation-based thoracic surgery training is increasingly incorporating physical models to enhance traditional learning methods. Conventional box trainers, though useful for basic skills, often lack anatomical accuracy and tactile feedback, limiting their relevance for complex procedures like thoracoscopic lung resection. High-fidelity 3D-printed lung models offer realistic anatomy and procedural flow, but their educational impact remains underexplored. Fifty-two surgical residents without prior thoracoscopic experience were randomly assigned to a high-fidelity lung model group or a conventional Fundamentals of Laparoscopic Surgery (FLS) box trainer group. All participants completed a baseline thoracic anatomy test and received standardized educational materials. The lung model group received structured simulation training on procedural anatomy and operative steps, while the FLS group practiced fundamental laparoscopic tasks. After training, participants repeated the anatomy test and performed a thoracoscopic lung wedge resection in a live animal model. Performance was assessed using the Objective Structured Assessment of Technical Skill (OSATS) and a 5-point confidence scale. A total of 52 surgical residents participated in the study, with 26 assigned to the high-fidelity lung model group and 26 to the FLS trainer group. Baseline anatomy scores were similar between groups (65.42 ± 6.10 vs. 66.12 ± 5.92; p = 0.710). Posttraining, the lung model group showed greater gains in anatomy comprehension (87.60 ± 4.75 vs. 78.19 ± 5.54; p < 0.001), higher OSATS scores (19.18 ± 2.43 vs. 15.41 ± 2.41; p < 0.001), and increased confidence (3.13 ± 0.61 vs. 2.27 ± 0.68; p = 0.002). High-fidelity 3D-printed lung models significantly enhance anatomical understanding, thoracoscopic skills, and confidence compared with conventional box trainers. These results support integrating anatomically accurate simulation into thoracic surgical education to improve both cognitive and psychomotor outcomes.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Clinical CompetenceModels, AnatomicInternship and ResidencyEducation, Medical, GraduatePneumonectomyPrinting, Three-DimensionalThoracoscopyLungSurgeonsSimulation TrainingHigh Fidelity Simulation TrainingHumansAnimalsLearning CurveTask Performance and AnalysisMaleCurriculumFemale

Autor:innen und Institutionen

  • Department of Thoracic Surgery, Peking University People's Hospital, Beijing, People's Republic of China.
  • Institute of Advanced Clinical Medicine, Peking University, Beijing, People's Republic of China.

Förderung

  • National Natural Science Foundation of China
  • Peking University People's Hospital Scientific Research Development Funds

Zitieren

APA

Liu, G., Yang, F., Zhou, Z., & Jiang, G. (2026). A Novel Competency-Based Simulation Model for Thoracoscopic Lung Resection. The Thoracic and Cardiovascular Surgeon, 74(02), 174-180. https://doi.org/10.1055/a-2702-2239

Vancouver

Liu G, Yang F, Zhou Z, Jiang G. A Novel Competency-Based Simulation Model for Thoracoscopic Lung Resection. The Thoracic and Cardiovascular Surgeon. 2026;74(02):174-180. doi:10.1055/a-2702-2239

BibTeX
@article{Liu2026,
  author = {Liu, Ganwei and Yang, Feng and Zhou, Zuli and Jiang, Guanchao},
  title = {A Novel Competency-Based Simulation Model for Thoracoscopic Lung Resection},
  journal = {The Thoracic and Cardiovascular Surgeon},
  year = {2026},
  volume = {74},
  number = {02},
  pages = {174--180},
  doi = {10.1055/a-2702-2239}
}
Kostenlos starten →