EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Seismic isolation systems for buildings in cold regions based on material constitutive models and sand cushion layers

Jing Li, Fangjing Jia

Sustainable Buildings · 2026 · 9 · 7

DOI: 10.1051/sbuild/2026004 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sustainable Buildings, online erschienen am 06.11.2026. Verfasst von Jing Li und 1 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In response to the dual threats of high-intensity earthquakes and seasonal frost heave faced by rural buildings in cold regions, conventional seismic isolation technologies currently suffer from material hardening and efficiency degradation at low temperatures. For this purpose, a composite seismic isolation system is proposed by studying the low rise masonry structure and connecting the base sand cushion layer and the ring beam sliding layer in series. By constructing a simplified dynamic model and considering the nonlinear constitutive relationship of materials with low-temperature characteristics, multi condition numerical simulation experiments were conducted using the Code_Aster platform for verification. Under Chi Chi wave conditions, the composite isolation system is less affected by long-period pulses, with an amplification factor controlled at 0.52 and an isolation rate maintained at 78.3%. Under the RH-1 wave condition, the isolation rate of the system reaches 82.2%, which is better than the 77.7% of a single sliding system. In the 8.5 degree 0.3 g working condition, when the friction coefficient is 0.3, the relative slip of the composite isolation system is only 32.6 mm, which is reduced by 10.9 mm compared to the ordinary system. The numerical simulation results show that the composite isolation system can effectively isolate earthquake energy and avoid frost heave risk, providing a potential numerical reference scheme for disaster prevention and reduction in cold regions.

Zitieren

APA

Li, J., & Jia, F. (2026). Seismic isolation systems for buildings in cold regions based on material constitutive models and sand cushion layers. Sustainable Buildings, 9, 7. https://doi.org/10.1051/sbuild/2026004

Vancouver

Li J, Jia F. Seismic isolation systems for buildings in cold regions based on material constitutive models and sand cushion layers. Sustainable Buildings. 2026;9:7. doi:10.1051/sbuild/2026004

BibTeX
@article{Li2026,
  author = {Li, Jing and Jia, Fangjing},
  title = {Seismic isolation systems for buildings in cold regions based on material constitutive models and sand cushion layers},
  journal = {Sustainable Buildings},
  year = {2026},
  volume = {9},
  pages = {7},
  doi = {10.1051/sbuild/2026004}
}
Kostenlos starten →