EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Corrosion behavior of 000Cr25Ni20 and 304L stainless steels in boiling nitric acid solutions containing Ce 4+ ions

Qiqian Chen, Aili Ma, Lianmin Zhang, Yugui Zheng

Research & Design of Nuclear Engineering · 2025

DOI: 10.1051/rdne/2025009 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Research & Design of Nuclear Engineering, 2025. Verfasst von Qiqian Chen und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, LingChuang Research Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the corrosion behavior of 000Cr25Ni20 (C25) and 304L stainless steels (SS) in boiling nitric acid solution containing Ce 4+ ions. Open circuit potential, electrochemical impedance spectroscopy, potentiodynamic polarization, weight loss measurement, scanning electron microscopy, and energy dispersive spectroscopy were employed to elucidate the effects of Ce 4+ ions and nitric acid concentration on the corrosion behavior of C25 and 304L SS. The results demonstrated that Ce 4+ ions significantly accelerated the cathodic reaction, thereby markedly increasing the corrosion rates of both C25 and 304L SS. Both the cathodic reaction rate and the overall corrosion rate increased monotonically with increasing Ce 4+ concentration. However, in the presence of Ce 4+ ions, the effect of nitric acid concentration (3, 6, and 10 mol/L) on E corr , I corr , and R p for both SS was negligible, indicating that the influence of nitric acid concentration was less significant compared to that of Ce 4+ ions. The highest corrosion rates were observed during the initial 48-hour exposure cycle, followed by a decrease and stabilization in the subsequent four cycles. C25 exhibited superior corrosion resistance compared to 304L SS, suggesting its potential application in fabricating reprocessing equipment requiring higher corrosion resistance than 304L SS. These findings provide critical insights into operational monitoring and material selection for nuclear fuel reprocessing equipment.

Förderung

  • National Natural Science Foundation of China
  • LingChuang Research Project

Zitieren

APA

Chen, Q., Ma, A., Zhang, L., & Zheng, Y. (2025). Corrosion behavior of 000Cr25Ni20 and 304L stainless steels in boiling nitric acid solutions containing Ce 4+ ions. Research & Design of Nuclear Engineering. https://doi.org/10.1051/rdne/2025009

Vancouver

Chen Q, Ma A, Zhang L, Zheng Y. Corrosion behavior of 000Cr25Ni20 and 304L stainless steels in boiling nitric acid solutions containing Ce 4+ ions. Research & Design of Nuclear Engineering. 2025. doi:10.1051/rdne/2025009

BibTeX
@article{Chen2025,
  author = {Chen, Qiqian and Ma, Aili and Zhang, Lianmin and Zheng, Yugui},
  title = {Corrosion behavior of 000Cr25Ni20 and 304L stainless steels in boiling nitric acid solutions containing Ce 4+ ions},
  journal = {Research & Design of Nuclear Engineering},
  year = {2025},
  doi = {10.1051/rdne/2025009}
}
Kostenlos starten →