EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Toward scalable TiO 2 nanotube-coated orthopedic implants: electrolyte reuse, fluoride replenishment strategy, and furnace throughput modeling

Sachin M. Bhosle, Shrikant C. Mahadik

Manufacturing Review · 2026 · 13 · 12

DOI: 10.1051/mfreview/2026003 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Manufacturing Review, online erschienen am 17.06.2026. Verfasst von Sachin M. Bhosle und 1 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: No funding support.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Scalable manufacturing of titania nanotube (TiO 2 NT) coatings for orthopedic implants requires robust control of electrochemical anodization and post-anodization thermal processing under production-relevant conditions. While TiO 2 nanotube surfaces have shown promising biological performance at a laboratory scale, industrial translation is constrained by challenges associated with electrolyte reuse, process reproducibility, and annealing throughput. This study addresses these bottlenecks through a combined experimental and process-modeling approach focused on manufacturability rather than biological validation. Three anodization workflows, an optimized ethylene glycol-based ammonium fluoride process, a conventional EG + NH 4 F baseline, and an HF aqueous baseline, were benchmarked on additively manufactured Ti–6Al–4V substrates produced by direct metal laser sintering and electron beam melting. The optimized process produced larger nanotube diameters (108 ± 9.6 nm), higher anatase fraction after short annealing (84.9 ± 1.7%), and improved process yield (90.7 ± 2.3%) relative to baseline methods. Electrolyte reuse experiments revealed predictable fluoride depletion and accumulation of dissolved metallic species with increasing processed area; filtration removed particulates but only a limited fraction of dissolved ions. A simple predictive fluoride depletion model was therefore developed to enable proactive replenishment during reuse. Implant-scale furnace modeling showed that direct energy cost per implant is low, while throughput is governed primarily by cycle time. Overall, the study provides a practical framework for electrolyte lifecycle management and high-throughput thermal processing, supporting industrial-scale production of TiO 2 nanotube-coated orthopedic implants.

Förderung

  • No funding support

Zitieren

APA

Bhosle, S. M., & Mahadik, S. C. (2026). Toward scalable TiO 2 nanotube-coated orthopedic implants: electrolyte reuse, fluoride replenishment strategy, and furnace throughput modeling. Manufacturing Review, 13, 12. https://doi.org/10.1051/mfreview/2026003

Vancouver

Bhosle SM, Mahadik SC. Toward scalable TiO 2 nanotube-coated orthopedic implants: electrolyte reuse, fluoride replenishment strategy, and furnace throughput modeling. Manufacturing Review. 2026;13:12. doi:10.1051/mfreview/2026003

BibTeX
@article{Bhosle2026,
  author = {Bhosle, Sachin M. and Mahadik, Shrikant C.},
  title = {Toward scalable TiO 2 nanotube-coated orthopedic implants: electrolyte reuse, fluoride replenishment strategy, and furnace throughput modeling},
  journal = {Manufacturing Review},
  year = {2026},
  volume = {13},
  pages = {12},
  doi = {10.1051/mfreview/2026003}
}
Kostenlos starten →