Hybrid Cu-SiC-MWCNT functionally graded composites: fabrication and numerical modeling of flexural response
Metallurgical Research & Technology · 2026 · 123 (5) · 522
DOI: 10.1051/metal/2026097 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metallurgical Research & Technology, online erschienen am 05.08.2026. Verfasst von Yamile Cardona-Maya und 4 weiteren Autor:innen. Die Arbeit nennt 65 Literaturangaben.
Abstract (Originalsprache)
Functionally graded Cu-SiC-MWCNTs composites were fabricated via mechanical alloying of copper, silicon carbide, and multi-walled carbon nanotube powders, followed by uniaxial hot pressing. Alternative stacking sequences were implemented to investigate the effects of constituents on the copper matrix and to engineer through-thickness gradation of microstructure and properties. This work addresses whether combining SiC particles and MWCNTs in a graded Cu matrix can simultaneously enhance densification and stiffness, and tests the hypothesis that such hybrid gradation yields superior flexural performance that can be captured by the computational model. The materials were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy mapping, X-ray diffraction and Vickers microhardness testing. The results showed a monotonic increase of discrete, well-dispersed SiC through the thickness, while MWCNTs appeared as localized clusters. FGM composites (Cu-SiC) exhibited residual qualitative porosity; however, hybrid FGMs showed no oxygen signals in compositional maps, and XRD identified Cu-SiC-MWCNTs without secondary oxides or carbides. Hardness increased with SiC content and was systematically higher in the hybrids, consistent with MWCNT-assisted densification. Numerical four-point bending simulations compared an explicit ten-layer graded beam with a homogenized equivalent, enabling extraction of layer-wise effective properties and directly linking graded architecture to flexural response. The results demonstrate that SiC-driven stiffness combined with MWCNT-enabled densification yields graded copper composites with enhanced predicted flexural performance.
Zitieren
APA
Cardona-Maya, Y., Uribe-Suárez, D., Ramirez, F., Olmos-Villalba, L. C., & Merino, C. A. I. (2026). Hybrid Cu-SiC-MWCNT functionally graded composites: fabrication and numerical modeling of flexural response. Metallurgical Research & Technology, 123(5), 522. https://doi.org/10.1051/metal/2026097
Vancouver
Cardona-Maya Y, Uribe-Suárez D, Ramirez F, Olmos-Villalba LC, Merino CAI. Hybrid Cu-SiC-MWCNT functionally graded composites: fabrication and numerical modeling of flexural response. Metallurgical Research & Technology. 2026;123(5):522. doi:10.1051/metal/2026097
BibTeX
@article{CardonaMaya2026,
author = {Cardona-Maya, Yamile and Uribe-Suárez, Diego and Ramirez, Fernando and Olmos-Villalba, Luis C. and Merino, Cesar A. Isaza},
title = {Hybrid Cu-SiC-MWCNT functionally graded composites: fabrication and numerical modeling of flexural response},
journal = {Metallurgical Research & Technology},
year = {2026},
volume = {123},
number = {5},
pages = {522},
doi = {10.1051/metal/2026097}
}
EUVIMED