EUVIMEDEUVIMED entdecken
Crossref

Evolution of inclusions in Si-Al deoxidized 4Cr13 stainless steels

Cui Xiaokang, Cheng Wensen, Yin Shiwei, Wang Jian, Lin Hua, Li Jing

Metallurgical Research & Technology · 2026 · 123 (5) · 504

DOI: 10.1051/metal/2026084 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metallurgical Research & Technology, online erschienen am 20.07.2026. Verfasst von Cui Xiaokang und 5 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To reduce Type B inclusions in 4Cr13 stainless steel produced via the AOD–LF–VD–ingot casting route, this study investigated inclusion evolution under different deoxidation conditions during AOD secondary reduction. The results show that Si deoxidation effectively lowers the final Al content and suppresses Type B inclusions; however, excessive Si addition is detrimental. When the Si addition was 2 kg/t, the increased SiO 2 content reduced slag basicity to about 2.2, weakening the slag’s ability to absorb Al 2 O 3 -rich and spinel inclusions. The very low final Al content also promoted the formation of low-melting-point Si-rich inclusions during solidification, contributing to Type C inclusions. Increasing slag basicity to approximately 3.3 or higher enhanced spinel removal, but excessive Al still promoted Al 2 O 3 -rich and MgO·Al 2 O 3 spinel formation. The optimal Si addition was 1.5 kg/t, at which slag basicity and Al content were well balanced, enabling effective inclusion absorption, and the inclusions formed during cooling and solidification were finely dispersed.

Zitieren

APA

Xiaokang, C., Wensen, C., Shiwei, Y., Jian, W., Hua, L., & Jing, L. (2026). Evolution of inclusions in Si-Al deoxidized 4Cr13 stainless steels. Metallurgical Research & Technology, 123(5), 504. https://doi.org/10.1051/metal/2026084

Vancouver

Xiaokang C, Wensen C, Shiwei Y, Jian W, Hua L, Jing L. Evolution of inclusions in Si-Al deoxidized 4Cr13 stainless steels. Metallurgical Research & Technology. 2026;123(5):504. doi:10.1051/metal/2026084

BibTeX
@article{Xiaokang2026,
  author = {Xiaokang, Cui and Wensen, Cheng and Shiwei, Yin and Jian, Wang and Hua, Lin and Jing, Li},
  title = {Evolution of inclusions in Si-Al deoxidized 4Cr13 stainless steels},
  journal = {Metallurgical Research & Technology},
  year = {2026},
  volume = {123},
  number = {5},
  pages = {504},
  doi = {10.1051/metal/2026084}
}
Kostenlos starten →