Effect of rare earth Ce microalloying on microstructure evolution and mechanical properties of Fe-0.1C-4Mn medium-Mn automotive steel
Metallurgical Research & Technology · 2026 · 123 (4) · 430
DOI: 10.1051/metal/2026059 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metallurgical Research & Technology, online erschienen am 05.06.2026. Verfasst von Zhiyuan Wan und 3 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Gefördert von: nner Mongolia Autonomous Region Natural Science Foundation Key Projects, Open Research Fund from State Key Laboratory of Digital Steel, Northeastern University.
Abstract (Originalsprache)
To meet the demand for cost-effective, high-performance automotive steels compatible with “dual carbon” goals, this study investigates the influence of trace cerium (Ce) microalloying (0, 10, and 30 ppm) on a Fe-0.1C-4Mn medium-Mn steel subjected to a short-flow intercritical annealing process. The principal findings reveal that an optimal Ce addition of 10 ppm profoundly modifies the steel’s inclusion population and microstructure, leading to a superior combination of mechanical properties. Specifically, Ce addition transforms deleterious elongated MnS inclusions into refined, spherical CeAlO 3 /Ce 2 O 2 S composite particles, thereby enhancing microstructural homogeneity. Furthermore, it promotes grain refinement and markedly increases the volume fraction of retained austenite to 24.16%, while Mn and C partitioning during annealing enhances its thermal stability. Consequently, during tensile deformation, a pronounced transformation-induced plasticity (TRIP) effect is observed, with 96.90% of the retained austenite transforming to martensite. The resulting experimental steel with 10 ppm addition exhibits an exceptional strength-ductility synergy, achieving a yield strength of 914 MPa, an ultimate tensile strength of 1190 MPa, a total elongation of 30.67%, and a product of strength and elongation (PSE) of 36.49 GPa%. These enhancements are attributed to the synergistic operation of grain refinement, twinning, dislocation pinning, and the sustained TRIP effect. Conversely, an excessive Ce content of 30 ppm reduces the mechanical stability of retained austenite and degrades ductility, underscoring that a precise Ce concentration is critical for performance optimization. This work demonstrates that strategic Ce microalloying, combined with a simplified annealing route, provides a viable pathway for the low-cost, energy-efficient production of high-performance medium-Mn automotive steels.
Förderung
- nner Mongolia Autonomous Region Natural Science Foundation Key Projects
- Open Research Fund from State Key Laboratory of Digital Steel, Northeastern University
Zitieren
APA
Wan, Z., Dong, R., Cui, Q., & Yuan, X. (2026). Effect of rare earth Ce microalloying on microstructure evolution and mechanical properties of Fe-0.1C-4Mn medium-Mn automotive steel. Metallurgical Research & Technology, 123(4), 430. https://doi.org/10.1051/metal/2026059
Vancouver
Wan Z, Dong R, Cui Q, Yuan X. Effect of rare earth Ce microalloying on microstructure evolution and mechanical properties of Fe-0.1C-4Mn medium-Mn automotive steel. Metallurgical Research & Technology. 2026;123(4):430. doi:10.1051/metal/2026059
BibTeX
@article{Wan2026,
author = {Wan, Zhiyuan and Dong, Ruifeng and Cui, Qingling and Yuan, Xiaoming},
title = {Effect of rare earth Ce microalloying on microstructure evolution and mechanical properties of Fe-0.1C-4Mn medium-Mn automotive steel},
journal = {Metallurgical Research & Technology},
year = {2026},
volume = {123},
number = {4},
pages = {430},
doi = {10.1051/metal/2026059}
}
EUVIMED