EUVIMEDEUVIMED entdecken
Crossref

Tailoring mechanical properties of a hot-rolled Fe-Mn-Al-C-Cr-V steel via reversed austenite transformation

Zhuo Wang, Jing Wang, Peng Chen, Xiao-Wu Li

Metallurgical Research & Technology · 2026 · 123 (4) · 428

DOI: 10.1051/metal/2026058 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metallurgical Research & Technology, online erschienen am 05.06.2026. Verfasst von Zhuo Wang und 3 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An Fe-0.3C-5Mn-2Al-0.8Cr-0.15V steel was processed by austenite reversed transformation (ART) in the intercritical range of 650–750 °C to tailor its microstructure and mechanical behavior. Thermodynamic calculation and dilatometry guided the ART schedule, and the resulting microstructures were characterized by scanning electron microscopy (SEM), electron backscatter diffraction (EBSD) and X-ray diffraction (XRD), combined with room-temperature tensile testing and fracture analysis. Intercritical annealing promotes a transition from a tempered-martensite matrix with scarce retained austenite (RA) at 650 °C to a ferrite+RA duplex structure with banded RA at 700 °C, and finally to coarse lath ferrite with reduced, unstable RA at 750 °C. The 700 °C treatments provide the best strength–ductility synergy through transformation induced plasticity (TRIP)-assisted, Portevin Le Châtelier (PLC)-affected work hardening, whereas 650 °C and 750 °C lead to high-strength but low-ductility states. The results highlight ART-controlled RA fraction, morphology and stability as key levers for designing lightweight medium-Mn automotive steels.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Wang, Z., Wang, J., Chen, P., & Li, X. (2026). Tailoring mechanical properties of a hot-rolled Fe-Mn-Al-C-Cr-V steel via reversed austenite transformation. Metallurgical Research & Technology, 123(4), 428. https://doi.org/10.1051/metal/2026058

Vancouver

Wang Z, Wang J, Chen P, Li X. Tailoring mechanical properties of a hot-rolled Fe-Mn-Al-C-Cr-V steel via reversed austenite transformation. Metallurgical Research & Technology. 2026;123(4):428. doi:10.1051/metal/2026058

BibTeX
@article{Wang2026,
  author = {Wang, Zhuo and Wang, Jing and Chen, Peng and Li, Xiao-Wu},
  title = {Tailoring mechanical properties of a hot-rolled Fe-Mn-Al-C-Cr-V steel via reversed austenite transformation},
  journal = {Metallurgical Research & Technology},
  year = {2026},
  volume = {123},
  number = {4},
  pages = {428},
  doi = {10.1051/metal/2026058}
}
Kostenlos starten →