EUVIMEDEUVIMED entdecken
Crossref

Abrasive wear resistance and microstructural characteristics of heat treated high chromium white cast iron

Boyan Yordanov, Iliyan Mitov

Metallurgical Research & Technology · 2026 · 123 (4) · 420

DOI: 10.1051/metal/2026053 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metallurgical Research & Technology, online erschienen am 09.06.2026. Verfasst von Boyan Yordanov und 1 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the microstructure, hardness, and abrasive wear resistance of hypereutectic high-chromium white cast iron (3.76 wt.% C, 0.87 wt.% Si, 0.85 wt.% Mn, 17.36 wt.% Cr, 2.01 wt.% Mo and 0.53 wt.% Ni) under different heat treatment conditions. The as-cast microstructure consists of primary (Fe,Cr) 7 C 3 carbides in an retained austenite and martensite matrix. Increasing the austenitizing temperature from 970 °C to 1100 °C promotes greater carbide dissolution, enriching the austenite with carbon and chromium, which lowers the Ms temperature and increases retained austenite content approximately with 20%. Quenching from 970 °C followed by tempering at 450–550 °C yields maximum hardness of 62–63 HRC, while quenching from 1100 °C followed by tempering at 550–600 °C induces secondary hardening through retained austenite transformation and precipitation of fine M 2 3 C 6 carbides. The optimal heat treatment regime is austenitization at 1100 °C and tempering at 600 °C, it provides the best abrasive wear performance, reducing the wear rate to V = 9.467 × 10 –6 g·m –1 and increasing wear resistance to E = 105634 m·g –1 , representing a 33% improvement compared to the as-cast condition. The enhanced wear resistance is attributed to the combined effect of tempered martensite, primary M 7 C 3 carbides, finely dispersed secondary carbides, and the transformation of retained austenite during abrasion.

Zitieren

APA

Yordanov, B., & Mitov, I. (2026). Abrasive wear resistance and microstructural characteristics of heat treated high chromium white cast iron. Metallurgical Research & Technology, 123(4), 420. https://doi.org/10.1051/metal/2026053

Vancouver

Yordanov B, Mitov I. Abrasive wear resistance and microstructural characteristics of heat treated high chromium white cast iron. Metallurgical Research & Technology. 2026;123(4):420. doi:10.1051/metal/2026053

BibTeX
@article{Yordanov2026,
  author = {Yordanov, Boyan and Mitov, Iliyan},
  title = {Abrasive wear resistance and microstructural characteristics of heat treated high chromium white cast iron},
  journal = {Metallurgical Research & Technology},
  year = {2026},
  volume = {123},
  number = {4},
  pages = {420},
  doi = {10.1051/metal/2026053}
}
Kostenlos starten →