EUVIMEDEUVIMED entdecken
Crossref

End-point temperature prediction for EAF smelting based on mechanism modeling and residual stacking

Xin Hou, Jing Li, Yan Wang

Metallurgical Research & Technology · 2026 · 123 (4) · 418

DOI: 10.1051/metal/2026042 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metallurgical Research & Technology, online erschienen am 05.06.2026. Verfasst von Xin Hou und 2 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study proposes a mechanism model based on the law of energy conservation. The model divides the entire smelting cycle into n time periods, calculates the molten steel temperature at each moment, and establishes a temporal benchmark for temperature evolution from the initial stage to the end point. An η scaling coefficient is introduced to dynamically optimize the residual contribution weight. Experimental verification shows that the proposed model significantly outperforms both the mechanism model and the random forest (RF) + light gradient boosting machine (LGBM) data-driven model. The R 2 of the mechanism model is 0.82 and RMSE is 15.2; after data correction, R 2 is increased to 0.93 and RMSE is reduced to 7.09. The hit rates within ±10 ∘ C and ±15 ∘ C reach 88.3% and 93.3%, respectively, which are 20.0 and 6.7 percentage points higher than those of the data-driven model. The model not only anchors the physical temporal logic of temperature change through mechanism modeling, but also focuses on end-point accuracy optimization through data correction, providing an efficient technical approach for precise end-point control in electric arc furnace (EAF) smelting.

Zitieren

APA

Hou, X., Li, J., & Wang, Y. (2026). End-point temperature prediction for EAF smelting based on mechanism modeling and residual stacking. Metallurgical Research & Technology, 123(4), 418. https://doi.org/10.1051/metal/2026042

Vancouver

Hou X, Li J, Wang Y. End-point temperature prediction for EAF smelting based on mechanism modeling and residual stacking. Metallurgical Research & Technology. 2026;123(4):418. doi:10.1051/metal/2026042

BibTeX
@article{Hou2026,
  author = {Hou, Xin and Li, Jing and Wang, Yan},
  title = {End-point temperature prediction for EAF smelting based on mechanism modeling and residual stacking},
  journal = {Metallurgical Research & Technology},
  year = {2026},
  volume = {123},
  number = {4},
  pages = {418},
  doi = {10.1051/metal/2026042}
}
Kostenlos starten →