EUVIMEDEUVIMED entdecken
Crossref

Characterization of molybdenum-modified aluminide coating on 304 stainless steel via slurry aluminizing

Ibrahim Owolabi Ambali, Tan Siew Min, Anasyida Abu Seman, Tuti Katrina Abdullah, Khairunisak Abdul Razak, Brij Kumar Dhindaw, Yusuf L. Shuaib-Babata

Metallurgical Research & Technology · 2026 · 123 (3) · 319

DOI: 10.1051/metal/2026020 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metallurgical Research & Technology, online erschienen am 27.03.2026. Verfasst von Ibrahim Owolabi Ambali und 6 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Gefördert von: USM Bridging Grant.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the microstructural changes and growth kinetics of intermetallic compounds in Mo-modified aluminide coatings on 304 stainless steels with varying temperatures and times. Molybdenum and alumina were introduced via slurry aluminizing. Heat treatments were conducted at 750 °C, 800 °C, and 850 °C for varying times (6, 8, and 10 h). Aluminide coating was characterized with SEM, EDX, and XRD, revealed the presence of multilayer phases comprising of Fe-Al and Mo-Al intermetallic compounds, along with an alumina scale on the coating surface. Samples heated at 750 °C showed uniform coatings, while those at 800 °C and 850 °C exhibited voids and cracks. The growth kinetics of the coating obey a parabolic law conforming to diffusion-controlled growth. The activation energies calculated for FeAl and Fe 3 Al were 360 kJ/mol and 237 kJ/mol, respectively, which is higher than that of coatings containing aluminium (FeAl layer: 180 kJ/mol and and Fe 3 Al layer: 260 kJ/mol). The total activation energy (Q) was 26 kJ/mol for coatings containing molybdenum and 53 kJ/mol for coatings with only aluminium. Hardness of the intermetallic layers varied from 378 to 966 HV for Mo-modified coatings as compared to aluminide coating (380 to 1030 Hv). The corrosion behaviour of Mo-aluminide coatings was investigated in 3.5% NaCl using polarization and electrochemical impedance spectroscopy (EIS) tests. Results show improved performance of corrosion resistance due to Mo-rich intermetallic phases, with the 6 h sample exhibiting the best corrosion resistance.

Förderung

  • USM Bridging Grant

Zitieren

APA

Ambali, I. O., Min, T. S., Seman, A. A., Abdullah, T. K., Razak, K. A., Dhindaw, B. K., & Shuaib-Babata, Y. L. (2026). Characterization of molybdenum-modified aluminide coating on 304 stainless steel via slurry aluminizing. Metallurgical Research & Technology, 123(3), 319. https://doi.org/10.1051/metal/2026020

Vancouver

Ambali IO, Min TS, Seman AA, Abdullah TK, Razak KA, Dhindaw BK, et al. Characterization of molybdenum-modified aluminide coating on 304 stainless steel via slurry aluminizing. Metallurgical Research & Technology. 2026;123(3):319. doi:10.1051/metal/2026020

BibTeX
@article{Ambali2026,
  author = {Ambali, Ibrahim Owolabi and Min, Tan Siew and Seman, Anasyida Abu and Abdullah, Tuti Katrina and Razak, Khairunisak Abdul and Dhindaw, Brij Kumar and Shuaib-Babata, Yusuf L.},
  title = {Characterization of molybdenum-modified aluminide coating on 304 stainless steel via slurry aluminizing},
  journal = {Metallurgical Research & Technology},
  year = {2026},
  volume = {123},
  number = {3},
  pages = {319},
  doi = {10.1051/metal/2026020}
}
Kostenlos starten →