EUVIMEDEUVIMED entdecken
Crossref

Reaction pathways in synergistic carbothermal reduction of fly ash and red mud for ferrosilicon alloy synthesis ⋆

Jingyu Zhao, Yingjiang Wen, Jiayong Qiu, Kai Zhao, Xiaoyue Fan, Yifei Lv, Zhuo Chen, Dianchun Ju, Runsheng Xu, Jianliang Zhang

Metallurgical Research & Technology · 2026 · 123 (3) · 316

DOI: 10.1051/metal/2026017 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metallurgical Research & Technology, online erschienen am 27.03.2026. Verfasst von Jingyu Zhao und 9 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Gefördert von: the Postgraduate Research and Practice Innovation Project of Jiangsu Provincial Department of Education in 2025, the Innovation and Entrepreneurship Training Program for College Students in Jiangsu Province, the Industry-University Cooperation and Collaborative Talent Development Program under the Ministry of Education.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To enhance the utilization efficiency of industrial byproducts, a synergistic carbothermal reduction process was developed for the synthesis of ferrosilicon alloy from fly ash and red mud. The reaction mechanisms were systematically analyzed through thermodynamic calculations. The effects of key parameters, including the iron-to-silicon molar ratio (n (Fe) /n (Si) ), carbon-to-oxygen molar ratio (n (C) /n (O) ), roasting temperature, and holding time on ferrosilicon formation were investigated using X-ray diffraction, scanning electron microscopy, and energy-dispersive spectroscopy. The results indicate that the ferrosilicon phase emerges when the n (Fe) /n (Si) ratio decreases to 1.01 and remains detectable at 0.76. Within this range, an n (C) /n (O) ratio between 0.33 and 0.48 is required to ensure complete reduction. At a fixed holding time of 2 h, ferrosilicon formation commences at 1723 K with increasing roasting temperature from 1673 K to 1823 K. Lower temperatures hinder the complete reaction between metallic Fe and mullite. Although higher temperatures (up to 1823 K) do not induce significant phase transformations, they markedly reduce residual carbon content. At a constant temperature of 1723 K, extending the duration from 1 h to 2 h or longer promotes ferrosilicon formation, with a duration of 4 h substantially reducing the residual carbon, indicating a more complete reaction. The optimal synthesis conditions were determined as follows: n (Fe) /n (Si) = 0.76–1.01, n (c) /n (O) = 0.33, roasting temperature of 1723–1823 K, and holding time 2–4 h. In particular, satisfactory results were achieved either at 1823 K for 2 h or at 1723 K for 4 h. Combined thermodynamic and experimental analyses revealed the primary reaction pathway as follows: Al 2 O 3 + SiO 2 → mullite, and Fe 2 O 3 → Fe 3 O 4 → FeO →Fe, followed by Fe+mullite→Fe 3 Si; SiO 2 + Fe → Fe 3 Si; Nosean → NaAlSiO 4 + Na 2 SiO 3 , followed by NaAlSiO 4 / Na 2 SiO 3 + Fe → Fe 3 Si.

Förderung

  • the Postgraduate Research and Practice Innovation Project of Jiangsu Provincial Department of Education in 2025
  • the Innovation and Entrepreneurship Training Program for College Students in Jiangsu Province
  • the Industry-University Cooperation and Collaborative Talent Development Program under the Ministry of Education

Zitieren

APA

Zhao, J., Wen, Y., Qiu, J., Zhao, K., Fan, X., Lv, Y., Chen, Z., Ju, D., Xu, R., & Zhang, J. (2026). Reaction pathways in synergistic carbothermal reduction of fly ash and red mud for ferrosilicon alloy synthesis ⋆. Metallurgical Research & Technology, 123(3), 316. https://doi.org/10.1051/metal/2026017

Vancouver

Zhao J, Wen Y, Qiu J, Zhao K, Fan X, Lv Y, et al. Reaction pathways in synergistic carbothermal reduction of fly ash and red mud for ferrosilicon alloy synthesis ⋆. Metallurgical Research & Technology. 2026;123(3):316. doi:10.1051/metal/2026017

BibTeX
@article{Zhao2026,
  author = {Zhao, Jingyu and Wen, Yingjiang and Qiu, Jiayong and Zhao, Kai and Fan, Xiaoyue and Lv, Yifei and Chen, Zhuo and Ju, Dianchun and Xu, Runsheng and Zhang, Jianliang},
  title = {Reaction pathways in synergistic carbothermal reduction of fly ash and red mud for ferrosilicon alloy synthesis ⋆},
  journal = {Metallurgical Research & Technology},
  year = {2026},
  volume = {123},
  number = {3},
  pages = {316},
  doi = {10.1051/metal/2026017}
}
Kostenlos starten →