EUVIMEDEUVIMED entdecken
Crossref

The synergistic strength-toughness optimization effect of TiB 2 and TiC composite reinforcing phases in Ti-6Al-4V alloy cladding layers

Weibin Ren, Zhanzheng Fan, Weihao Zuo, Yujiang Wang

Metallurgical Research & Technology · 2026 · 123 (2) · 223

DOI: 10.1051/metal/2025153 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metallurgical Research & Technology, online erschienen am 10.03.2026. Verfasst von Weibin Ren und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: National Key R&D Program of China, Defense Technology Key Laboratory for Equipment Remanufacturing, National Commercial Aircraft Manufacturing Engineering Technology Research Center.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In addressing the challenge of simultaneously improving the hardness, wear resistance, and crack resistance of Ti-6Al-4V alloy cladding layers, laser cladding carried out using three powder ratios: 15% TiC + 85% TC4, 15% TiC + 5% TiB 2 + 80% TC4, and 20% TiC + 80% TC4. A comparative investigation was conducted on the microstructure, phase precipitation, electrochemical corrosion behavior, and basic mechanical properties of the resulting cladding layers. The experimental results showed that in cladding layers reinforced with TiC, an increase in TiC content led to the formation of TiC, α-Ti, and β-Ti. The addition of TiB 2 significantly refined the grain size of the TiC reinforcement, and a low two-dimensional lattice mismatch of 0.98% was observed between TiB 2 and TiC, indicating a strong synergistic effect between the two phases. The hardness of the TiB 2 -TiC composite cladding layer reached 628 HV 0 . 2 , which was 93.23% compared with the substrate and significant higher than the other two cladding ratios. The average friction coefficient of the TiB 2 -TiC cladding layer was 0.2660, a 31.90% reduction compared to the 15% TiC cladding layer. Compared with the other two cladding layers, the maximum wear depth decreased by 26.70%, and the wear volume was reduced by 26.17%. Furthermore, the fusion line of the TiC-TiB 2 cladding layer moved downward by 0.319 mm, indicating more uniform thermal diffusion and improved stress transfer characteristics. The self-corrosion potential was –0.1890 V, demonstrating superior corrosion resistance relative to the other cladding ratios. This study reveals the synergistic effect of TiC and TiB 2 composite reinforcing phases in Ti-6Al-4V alloy laser cladding layers, achieving a simultaneous improvement in hardness, toughness, and wear resistance, and providing theoretical and methodological guidance for optimizing the surface properties of such alloys.

Förderung

  • National Key R&D Program of China
  • Defense Technology Key Laboratory for Equipment Remanufacturing
  • National Commercial Aircraft Manufacturing Engineering Technology Research Center

Zitieren

APA

Ren, W., Fan, Z., Zuo, W., & Wang, Y. (2026). The synergistic strength-toughness optimization effect of TiB 2 and TiC composite reinforcing phases in Ti-6Al-4V alloy cladding layers. Metallurgical Research & Technology, 123(2), 223. https://doi.org/10.1051/metal/2025153

Vancouver

Ren W, Fan Z, Zuo W, Wang Y. The synergistic strength-toughness optimization effect of TiB 2 and TiC composite reinforcing phases in Ti-6Al-4V alloy cladding layers. Metallurgical Research & Technology. 2026;123(2):223. doi:10.1051/metal/2025153

BibTeX
@article{Ren2026,
  author = {Ren, Weibin and Fan, Zhanzheng and Zuo, Weihao and Wang, Yujiang},
  title = {The synergistic strength-toughness optimization effect of TiB 2 and TiC composite reinforcing phases in Ti-6Al-4V alloy cladding layers},
  journal = {Metallurgical Research & Technology},
  year = {2026},
  volume = {123},
  number = {2},
  pages = {223},
  doi = {10.1051/metal/2025153}
}
Kostenlos starten →