EUVIMEDEUVIMED entdecken
Crossref

Investigation of mechanical properties and microstructures on both-side spray quenching methodology

Kollati Prudhvi Ravi Kumar, Girija Shankar Dixit, Samarendu Mohanty, Sowhm Swain Mohapatra, Abanti Sahoo, Soumya Sanjeeb Mohapatra

Metallurgical Research & Technology · 2026 · 123 (3) · 330

DOI: 10.1051/metal/2025148 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metallurgical Research & Technology, online erschienen am 13.05.2026. Verfasst von Kollati Prudhvi Ravi Kumar und 5 weiteren Autor:innen. Die Arbeit nennt 57 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

For the attainment of uniform microstructure, high hardness, high tensile strength, and low coolant consumption characteristics, quenching was performed on both surfaces of the hot metal. Novel coolants were used to maintain a high-flux spray, and the results were compared with water. As the precise procedure for accomplishing the foregoing is not readily available in the open literature, an effort was made to develop the process utilising the discussed method in the present work. Spray quenching experiments were conducted on an AISI 1020 steel plate, and then the heat-treated samples were subsequently characterized for the evaluation of microstructure and mechanical properties. Finally, the obtained values were also compared with traditional methodologies, such as only quenching from upward side or downward side. The result clearly indicates the attainment of a uniform microstructure profile for cooling performed on both sides. The achieved hardness is 3.5 times that of as-received steel. Furthermore, the achieved tensile strength value is almost three times that of as-received steel. The thermal analysis indicates that minimum coolant consumption is achieved in the case of quenching performed on both sides of the plate.

Zitieren

APA

Kumar, K. P. R., Dixit, G. S., Mohanty, S., Mohapatra, S. S., Sahoo, A., & Mohapatra, S. S. (2026). Investigation of mechanical properties and microstructures on both-side spray quenching methodology. Metallurgical Research & Technology, 123(3), 330. https://doi.org/10.1051/metal/2025148

Vancouver

Kumar KPR, Dixit GS, Mohanty S, Mohapatra SS, Sahoo A, Mohapatra SS. Investigation of mechanical properties and microstructures on both-side spray quenching methodology. Metallurgical Research & Technology. 2026;123(3):330. doi:10.1051/metal/2025148

BibTeX
@article{Kumar2026,
  author = {Kumar, Kollati Prudhvi Ravi and Dixit, Girija Shankar and Mohanty, Samarendu and Mohapatra, Sowhm Swain and Sahoo, Abanti and Mohapatra, Soumya Sanjeeb},
  title = {Investigation of mechanical properties and microstructures on both-side spray quenching methodology},
  journal = {Metallurgical Research & Technology},
  year = {2026},
  volume = {123},
  number = {3},
  pages = {330},
  doi = {10.1051/metal/2025148}
}
Kostenlos starten →