EUVIMEDEUVIMED entdecken
Crossref

The characteristics of Fe‐Mn‐Si‐Cr‐Ni shape memory alloy with variation of carbon content and training process

Mukhlis Agung Prasetyo, Albertus Deny Heri Setyawan, Nofrijon Sofyan, Rahadian Roberto, Efendi Mabruri

Metallurgical Research & Technology · 2026 · 123 (2) · 230

DOI: 10.1051/metal/2025133 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metallurgical Research & Technology, online erschienen am 10.03.2026. Verfasst von Mukhlis Agung Prasetyo und 4 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Gefördert von: Badan Riset dan Inovasi Nasional, LPDP.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Fe‐Mn‐Si‐Cr‐Ni alloy is a shape memory alloy with potential for civil infrastructure applications, which can be used for building reinforcement and seismic dampers due to its shape memory effect (SME) and pseudoelasticity (PE) capabilities. The Fe‐Mn‐Si properties could be optimized by the addition of precipitate‐formers such as carbon combined with several series of training. This work was conducted using a hot rolling process at a temperature of 1273 K to obtain a 60% reduction, followed by a solution treatment process at a temperature of 1373 K for 1 h and aging at 973 K for 30 min. A temperature of 573 K and 6% deformation were used in training, with repetitive loading and heating until five cycles were completed. The research results showed that training with 6% pre‐strain and heating at 573 K has been proven to boost the SME value of FeMnSiCrNi alloy. However, the most effective training cycle on the alloy happened in the third cycle, resulting in excellent SME. The strain recovery capabilities of Alloy‐3 improved by 12% in the third training cycle compared to Alloy‐3 in the first training cycle and by 32% compared to Alloy‐1 in the same training level. Despite the positive impact, training cycles of up to five times reduce the alloy's strain recovery properties and increase strain hardening. Alloy‐3 exhibits severe strain recovery deterioration due to saturation of non‐reversible martensite formation generated by significant deformation strain.

Förderung

  • Badan Riset dan Inovasi Nasional
  • LPDP

Zitieren

APA

Prasetyo, M. A., Setyawan, A. D. H., Sofyan, N., Roberto, R., & Mabruri, E. (2026). The characteristics of Fe‐Mn‐Si‐Cr‐Ni shape memory alloy with variation of carbon content and training process. Metallurgical Research & Technology, 123(2), 230. https://doi.org/10.1051/metal/2025133

Vancouver

Prasetyo MA, Setyawan ADH, Sofyan N, Roberto R, Mabruri E. The characteristics of Fe‐Mn‐Si‐Cr‐Ni shape memory alloy with variation of carbon content and training process. Metallurgical Research & Technology. 2026;123(2):230. doi:10.1051/metal/2025133

BibTeX
@article{Prasetyo2026,
  author = {Prasetyo, Mukhlis Agung and Setyawan, Albertus Deny Heri and Sofyan, Nofrijon and Roberto, Rahadian and Mabruri, Efendi},
  title = {The characteristics of Fe‐Mn‐Si‐Cr‐Ni shape memory alloy with variation of carbon content and training process},
  journal = {Metallurgical Research & Technology},
  year = {2026},
  volume = {123},
  number = {2},
  pages = {230},
  doi = {10.1051/metal/2025133}
}
Kostenlos starten →