EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Detection of early plasticity in steel using large scale 4-point bending

Fatoumata Mbissine Diouf, Wilfried Liegard, Laurent Tabourot, Ndèye Awa Sene, Emile Roux, Pascale Balland

Mechanics & Industry · 2026 · 27 · 17

DOI: 10.1051/meca/2026014 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Mechanics & Industry, online erschienen am 21.04.2026. Verfasst von Fatoumata Mbissine Diouf und 5 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Campus France.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Characterizing the early metallic plasticity of materials remains a challenge, as the stress–strain curve derived from a tensile test cannot accurately identify the first plastic deformations. Although tensile thermal camera coupling reveals an elastic limit lower than the conventional limit, it does not reveal incipient plasticity. The aim of this study is to develop an experimental setup and the method for detecting minimum plastic deformations before the classical yield strength determined by tensile testing is reached. An original large 4-point bending machine was designed to perform loading-unloading cycles and to analyze specimen profiles by detecting irreversible deformations, signs of early plasticity. Tests on the bending machine using dual-phase steels (DP600 and DP800) and cold-rolled low-carbon steel (DC01) specimens (1200 × 35 × (2 mm or 3 mm)) revealed the onset of irreversible strains occurring between 127–135, 154–169, and 64–68 MPa, respectively. These values are well below their respective yield strengths of 305, 360, and 158 MPa. These results confirm the existence of early plasticity and pave the way for the design of a behavioral model that takes this phenomenon into account, in response to the challenges posed by the prediction of springback during cold forming of metallic materials.

Förderung

  • Campus France

Zitieren

APA

Diouf, F. M., Liegard, W., Tabourot, L., Sene, N. A., Roux, E., & Balland, P. (2026). Detection of early plasticity in steel using large scale 4-point bending. Mechanics & Industry, 27, 17. https://doi.org/10.1051/meca/2026014

Vancouver

Diouf FM, Liegard W, Tabourot L, Sene NA, Roux E, Balland P. Detection of early plasticity in steel using large scale 4-point bending. Mechanics & Industry. 2026;27:17. doi:10.1051/meca/2026014

BibTeX
@article{Diouf2026,
  author = {Diouf, Fatoumata Mbissine and Liegard, Wilfried and Tabourot, Laurent and Sene, Ndèye Awa and Roux, Emile and Balland, Pascale},
  title = {Detection of early plasticity in steel using large scale 4-point bending},
  journal = {Mechanics & Industry},
  year = {2026},
  volume = {27},
  pages = {17},
  doi = {10.1051/meca/2026014}
}
Kostenlos starten →