EUVIMEDEUVIMED entdecken
Crossref

Improvement of wear resistance of Hardox 400 steel by duplex treatment combining gas carburizing and CrN PVD coating

Abir Khaldi, Abdelkarim Ghanem, Mohamed Ali Terres

Matériaux & Techniques · 2026 · 114 (2) · 203

DOI: 10.1051/mattech/2026011 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Matériaux & Techniques, online erschienen am 10.03.2026. Verfasst von Abir Khaldi und 2 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the wear resistance of two different surface techniques applied to Hardox 400 Steel: the direct deposition of chromium nitride (CrN) via physical vapor deposition (PVD), and a duplex strategy where CrN is deposited onto a surface that has first undergone gas carburizing. Our research focuses on the impact of these two treatments on improving the scratch resistance of Hardox 400 steel. A scratch test was performed to evaluate the adhesion of the thin films by identifying the critical loads corresponding to the onset of each damage mode. Adhesion analysis was supplemented with optical microscopy observations. The duplex treatment improves load distribution and reduces coating cracking. Consequently, higher critical load values were achieved. The PVD and duplex-treated layers exhibited Lc1 values of approximately 6 N and 10 N, respectively, which are significantly higher than that of untreated steel (3.17 N), indicating improved resistance to cohesive cracking and enhanced coating adhesion. The best coating adhesion was achieved with the duplex treatment. Multipass scratch tests were conducted to quantify the coefficient of friction, wear volumes, and energy dissipation. The results provided valuable insights into the tribological behavior of the different treatments. It was demonstrated that the duplex system significantly reduces the coefficient of friction by nearly a factor of 3, and decreases the wear volume to approximately 1.56×10 6 μm 3 for the duplex CrN coated sample and 9.53×10 6 μm 3 for the untreated Hardox 400, under an applied load of 20 N.

Zitieren

APA

Khaldi, A., Ghanem, A., & Terres, M. A. (2026). Improvement of wear resistance of Hardox 400 steel by duplex treatment combining gas carburizing and CrN PVD coating. Matériaux & Techniques, 114(2), 203. https://doi.org/10.1051/mattech/2026011

Vancouver

Khaldi A, Ghanem A, Terres MA. Improvement of wear resistance of Hardox 400 steel by duplex treatment combining gas carburizing and CrN PVD coating. Matériaux & Techniques. 2026;114(2):203. doi:10.1051/mattech/2026011

BibTeX
@article{Khaldi2026,
  author = {Khaldi, Abir and Ghanem, Abdelkarim and Terres, Mohamed Ali},
  title = {Improvement of wear resistance of Hardox 400 steel by duplex treatment combining gas carburizing and CrN PVD coating},
  journal = {Matériaux & Techniques},
  year = {2026},
  volume = {114},
  number = {2},
  pages = {203},
  doi = {10.1051/mattech/2026011}
}
Kostenlos starten →