Modeling and experimental comparison of the plasma jet induced etch front for subsurface damage determination
Journal of the European Optical Society-Rapid Publications · 2026 · 22 (1) · 51
DOI: 10.1051/jeos/2026047 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of the European Optical Society-Rapid Publications, online erschienen am 09.06.2026. Verfasst von Heike Müller und 1 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesministerium für Wirtschaft und Energie.
Abstract (Originalsprache)
The performance of optical systems can be compromised by subsurface damage (SSD) caused by mechanical processing. This study presents a destructive method of determining SSD depth in fused silica surfaces using atmospheric plasma jet etching (PJE). A simplified mathematical model describes how the etching front evolves under the assumption of isotropic etching. By comparing simulated surfaces with topographies determined experimentally after each etching step, an isotropy factor (IF) is calculated to identify deviations from isotropy. Areas with an IF greater than one exhibit anisotropic etching behavior, indicating the presence of SSD. The method was validated using defined Vickers indentations, scratches and conventionally polished samples. The maximum SSD depth correlates with both the maximum IF value and the slope of the cavity volume versus etching depth. For the samples examined, SSD depths ranged from 6.37 μm to 52.47 μm. The results agreed well with OCT measurements (deviation
Förderung
- Bundesministerium für Wirtschaft und Energie
Zitieren
APA
Müller, H., & Arnold, T. (2026). Modeling and experimental comparison of the plasma jet induced etch front for subsurface damage determination. Journal of the European Optical Society-Rapid Publications, 22(1), 51. https://doi.org/10.1051/jeos/2026047
Vancouver
Müller H, Arnold T. Modeling and experimental comparison of the plasma jet induced etch front for subsurface damage determination. Journal of the European Optical Society-Rapid Publications. 2026;22(1):51. doi:10.1051/jeos/2026047
BibTeX
@article{Mller2026,
author = {Müller, Heike and Arnold, Thomas},
title = {Modeling and experimental comparison of the plasma jet induced etch front for subsurface damage determination},
journal = {Journal of the European Optical Society-Rapid Publications},
year = {2026},
volume = {22},
number = {1},
pages = {51},
doi = {10.1051/jeos/2026047}
}
EUVIMED