Project “BUSSARD” − a holistic development of high-efficiency solar cells covering innovative front-end, metallization and interconnection approaches
EPJ Photovoltaics · 2025 · 16 · 6
DOI: 10.1051/epjpv/2024043 ↗Kurz gefasst
Fachartikel in der Zeitschrift EPJ Photovoltaics, online erschienen am 08.01.2025. Verfasst von Andreas Lorenz und 11 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Horizon 2020 Framework Programme.
Abstract (Originalsprache)
Within this work, we present key results of the transnational European research project “Bussard”. The aim of this project is the development and evaluation of various innovative approaches for highly efficient cell concepts such as tunnel oxide passivating contact (TOPCon) solar cells considering the whole process chain including front-end, back-end and module processing. We present atomic layer deposition (ALD) as a high-throughput alternative for the deposition of Al 2 O 3 passivation layers on the front side of TOPCon solar cells enabling a substantial reduction of the emitter saturation current density down to j 0e = 13 fA/cm 2 . In the field of metallization, we evaluate and demonstrate three innovative approaches for the fine-line metallization of TOPCon solar cells. In this study we focus on multi-nozzle parallel dispensing, a technology that was developed as an alternative to standard screen-printing metallization and is used for the metallization of TOPCon solar cells for the first time. By optimizing the fabrication process at Fraunhofer ISE, we realize TOPCon solar cells (156.75 mm × 156.75 mm) with a champion conversion efficiency of up to η max = 24.2% (independently confirmed by Fraunhofer ISE CalLab PVCells). Finally, we present a comprehensive evaluation of the innovative Tape Solution interconnection concept for TOPCon cells and modules. We demonstrate the feasibility on small-scale and full-format modules and analyze the I – V results as well as cell-to-module (CTM) loss analysis using the simulation tool SmartCalc®. The results are compared to TOPCon modules interconnected via SmartWire Connection Technology (SWCT) and electrically conductive adhesive (ECA).
Förderung
- Horizon 2020 Framework Programme
Zitieren
APA
Lorenz, A., Schube, J., Nikitina, V., Mack, S., Schweigert, S., Buddgard, J., Albrecht, J., Pospischil, M., Kraft, A., Wolf, A., Hermle, M., & Clement, F. (2025). Project “BUSSARD” − a holistic development of high-efficiency solar cells covering innovative front-end, metallization and interconnection approaches. EPJ Photovoltaics, 16, 6. https://doi.org/10.1051/epjpv/2024043
Vancouver
Lorenz A, Schube J, Nikitina V, Mack S, Schweigert S, Buddgard J, et al. Project “BUSSARD” − a holistic development of high-efficiency solar cells covering innovative front-end, metallization and interconnection approaches. EPJ Photovoltaics. 2025;16:6. doi:10.1051/epjpv/2024043
BibTeX
@article{Lorenz2025,
author = {Lorenz, Andreas and Schube, Jörg and Nikitina, Veronika and Mack, Sebastian and Schweigert, Sebastian and Buddgard, Jonas and Albrecht, Jonas and Pospischil, Maximilian and Kraft, Achim and Wolf, Andreas and Hermle, Martin and Clement, Florian},
title = {Project “BUSSARD” − a holistic development of high-efficiency solar cells covering innovative front-end, metallization and interconnection approaches},
journal = {EPJ Photovoltaics},
year = {2025},
volume = {16},
pages = {6},
doi = {10.1051/epjpv/2024043}
}
EUVIMED